Cooling Lines - Install
Parts and Specification Information
Show/hide table
Illustration 1 | g03849149 |
Note: Verify that all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Show/hide table
Personal injury or death can occur from heavy components falling during removal or installation. Properly support the component with a suitable lifting device during removal or installation. |
Show/hide table
Climbing equipment may be required to access this service point. Refer to the Operation and Maintenance Manual, "Mounting and Dismounting" topic for safety information. |
Show/hide table
Item | Part Number | Description | Qty | Specification | Approximate Weight |
1 | 442-2865 | Hose | 1 | ||
2 | 313-5058 | Clamp | 4 | Orient the clamp pairs 180 degrees apart | |
3 | 8T-4986 | Hose Clamp | 1 | ||
4 | 442-2908 | Hose | 2 | ||
5 | 432-9667 | Hose Clamp | 4 |
- Install hose (1) between the cooling ducts. Secure hose (1) in place with four clamps (2).
- Secure the cooling hose to the duct with hose clamp (3).
Show/hide table
Illustration 3 g03849264 A view of the rear cooling ducts - Install two hoses (4) and secure each hose (4) at each end with a hose clamp (5).
Show/hide table
Illustration 2 | g03849252 |
A view of the cooling duct between the inverter cabinet and blower |
Caterpillar Information System:
3512C Generator Set Engine Engine Oil Pan - Remove and Install
3512C Generator Set Engine Engine Oil Filter Housing - Assemble
Procedure for Installing Operator Control System (OCS) On Workstation {7008, 7605} Procedure for Installing Operator Control System (OCS) On Workstation {7008, 7605}
Autonomy Log Processing Usage Instructions {7008, 7605} Autonomy Log Processing Usage Instructions {7008, 7605}
2015/06/25 A New Adapter Is Used with the Air Filter Indicator on Certain Machine Engines {1054, 7452}
2015/06/26 A New Adapter Is Used with the Air Filter Indicator on Certain Commercial Engines {7452}
Machine Security System (MSS3i) Integrated Normal Operation
Locating a Lost Autonomous Stop (A-Stop) Remote {79AU} Locating a Lost Autonomous Stop (A-Stop) Remote {79AU}
3516C High Displacement Engine Component Location
G3606 and G3608 Engines Engine Oil Pump - Install
3516C High Displacement Engine Sensor Signal (Analog, Passive) - Test
C13 Generator Set Maintenance Interval Schedule - Prime
794 AC Off-Highway Truck Field Assembly Engine Service Ladder - Install
G3600 A4 Engines Overhaul (Top End)
C32 Marine Engines Air Inlet Shutoff - Remove and Install
349F and 352F Excavators Machine System Specifications Relief Valve (Pilot)
2015/07/24 Cat® Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/25 Cat® Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/24 Cat® Reman Announces the Availability of Additional Engine Components for Certain Truck Engine Applications {1052, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
C280-08 Tier 4 Engine Engine Oil Filter Housings - Remove and Install
2015/06/25 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Machine Applications {1278}
2015/06/26 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Engine Applications {1278}
2015/06/26 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Truck Engine Applications {1278}
3512C Generator Set Engine Engine Oil Pan - Disassemble