Engine Service Ladder - Install
Parts and Specification Information
Show/hide table
Illustration 1 | g03848871 |
Note: Verify that all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Show/hide table
Personal injury or death can occur from heavy components falling during removal or installation. Properly support the component with a suitable lifting device during removal or installation. |
Show/hide table
Climbing equipment may be required to access this service point. Refer to the Operation and Maintenance Manual, "Mounting and Dismounting" topic for safety information. |
Show/hide table
Item | Part Number | Description | Qty | Specification | Approximate Weight |
1 | 442-2741 | Ladder As | 2 | |
|
2 | 4L-6454 | Bolt | 20 | ||
3 | 8T-4896 | Hard Washer | 20 | ||
4 | 2K-4973 | Locknut | 8 | ||
5 | 442-2763 | Bracket | 2 | ||
6 | 442-2769 | Bracket | 2 | ||
7 | 9X-2121 | Screw | 4 | ||
8 | 442-2767 | Lanyard | 4 | ||
9 | 442-2762 | Pin | 4 | ||
10 | 442-2755 | Ladder As | 2 | ||
11 | 8T-8919 | Bolt | 8 | ||
12 | 5P-1076 | Hard Washer | 16 | ||
13 | 1K-6872 | Locknut | 8 | ||
14 | 442-2760 | Ladder As | 2 | ||
15 | 442-2764 | Handle As | 2 | ||
16 | 5C-6266 | Bolt | 8 | ||
17 | 7X-0515 | Hard Washer | 8 |
- Use a suitable lifting device to install ladder assembly (1) to the frame using six bolts (2) and six hard washers (3).
- Install bracket (5) and bracket (6) using four bolts (2), four hard washers (3), and four locknuts (4).
- Install two screws (7), two lanyards (8), and two pins (9) to ladder assembly (1).
- Install ladder assembly (10) to ladder assembly (1) using two bolts (11), four hard washers (12), and two locknuts (13).
- Install ladder assembly (14) to ladder assembly (10) using two bolts (11), four hard washers (12), and two locknuts (13).
Show/hide table
Illustration 3 g03849111 A view of the handle on the right side of the frame by the engine - Install handle assembly (15) using four bolts (16) and four hard washers (17).
- Repeat Steps 1 through 6 for the left side of the machine.
Show/hide table
Illustration 2 | g03848904 |
A view of the right ladder assembly |
Caterpillar Information System:
794 AC Off-Highway Truck Field Assembly Cooling Lines - Install
3512C Generator Set Engine Engine Oil Pan - Remove and Install
3512C Generator Set Engine Engine Oil Filter Housing - Assemble
Procedure for Installing Operator Control System (OCS) On Workstation {7008, 7605} Procedure for Installing Operator Control System (OCS) On Workstation {7008, 7605}
Autonomy Log Processing Usage Instructions {7008, 7605} Autonomy Log Processing Usage Instructions {7008, 7605}
2015/06/25 A New Adapter Is Used with the Air Filter Indicator on Certain Machine Engines {1054, 7452}
2015/06/26 A New Adapter Is Used with the Air Filter Indicator on Certain Commercial Engines {7452}
Machine Security System (MSS3i) Integrated Normal Operation
Locating a Lost Autonomous Stop (A-Stop) Remote {79AU} Locating a Lost Autonomous Stop (A-Stop) Remote {79AU}
3516C High Displacement Engine Component Location
G3606 and G3608 Engines Engine Oil Pump - Install
3516C High Displacement Engine Sensor Signal (Analog, Passive) - Test
G3600 A4 Engines Overhaul (Top End)
C32 Marine Engines Air Inlet Shutoff - Remove and Install
349F and 352F Excavators Machine System Specifications Relief Valve (Pilot)
2015/07/24 Cat® Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/25 Cat® Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/24 Cat® Reman Announces the Availability of Additional Engine Components for Certain Truck Engine Applications {1052, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
C280-08 Tier 4 Engine Engine Oil Filter Housings - Remove and Install
2015/06/25 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Machine Applications {1278}
2015/06/26 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Engine Applications {1278}
2015/06/26 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Truck Engine Applications {1278}
3512C Generator Set Engine Engine Oil Pan - Disassemble
C4.4 and C7.1 Engines Speed Control - Test - Analog