New Exhaust Brackets Are Used on Certain G3500H Engines {1059}
- Engine:
- G3516H (S/N: GLM1-UP; GLN1-UP)
Description of Change: The new brackets provide increased strength and vibration resistance.
Adaptable To: The new brackets are adaptable back to first production on the serial numbers listed above.
Refer to Table 1 for the new and former part numbers.
Show/hide table
New Part Number     | Former Part Number     |
454-9483     | 356-5016     |
454-9486     | 356-5015     |
454-9488     | 356-5017     |
Show/hide table
New Part Number     | Description     | Quantity     |
0S-1587     | Bolt     | 4     |
1S-4305     | Spacer     | 4     |
454-9483     | Bracket     | 1     |
454-9486     | Bracket     | 1     |
454-9488     | Plate     | 2     |
Show/hide table
Effective Serial Numbers     |
S/N:GLM152-UP     |
S/N:GLN126-UP     |
Installation Instructions
Show/hide table
Illustration 1 | g03835105 |
(1) 356-5017 Plate (2) 356-5016 Bracket As (3) 356-5015 Bracket As |
- Remove and discard brackets (2) and (3). Retain all fastener hardware to reinstall with the new part.
- Remove and discard the plates (1). Retain the fastener hardware for the (left side) plate, to reinstall with new plate.
Note: New fastener hardware is provided for the right side plate.
Show/hide table
Illustration 2 | g03835123 |
(4) 454-9488 Plate (5) 0S-1587 Bolt (6) 1S-4305 Washer (Spacer) (7) 454-9483 Bracket (8) 454-9486 Bracket |
- Install the new plate (4) using the new bolts (5) and new washers (spacers) (6) .
- Install the new bracket (7) using the fastener hardware that was retained during disassembly. Location (A) .
- Install the new plate (4) using the fastener hardware that was retained during disassembly. Location (B) .
- Install the new bracket (8) using the fastener hardware that was retained during disassembly. Location (C) .
Caterpillar Information System:
2015/07/17 A New Tube Is Used for Certain 3500 Marine Engines {1354}
2015/05/15 Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15 Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/18 Cylinder Head And Spacer Plate Gasket Failures On Certain Truck Engines {1100}
C9.3 Marine Engine Exhaust Elbow - Remove and Install
C13, C15, and C18 Engines for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
C9.3 Marine Engine Exhaust Elbow - Remove and Install
Caterpillar® C N Electric Motors Installation and Removal Guide. {5927} Caterpillar® C N Electric Motors Installation and Removal Guide. {5927}
C9.3 Marine Engine Exhaust Elbow - Remove and Install
C8.7 Marine Engine Camshaft - Remove and Install
C11, C13, C15, and C18 Industrial Engines Variable Valve Actuator Response - Test
C2.2 Engines For Caterpillar Built Machines Injector Solenoid - Test
C9.3 Marine Auxiliary and Generator Set Engine Diagnostic Trouble Codes
G3408 and G3412 Engines Spark Plugs - Inspect/Adjust/Replace
C9.3 Marine Engine Engine Oil Filter Base - Remove and Install - Right-Hand Simplex
2015/05/18 ECM Hotline Process Change {1000}
C9.3 Marine Auxiliary and Generator Set Engine Fuel Pressure Is High
C9.3 Marine Auxiliary and Generator Set Engine Sensor Signal (Analog, Active) - Test
C9.3 Marine Auxiliary and Generator Set Engine Coolant Temperature Is High
C9.3 Marine Auxiliary and Generator Set Engine Fuel Temperature Is High
C11, C13, C15, and C18 Industrial Engines Shutdown (Ground Level) - Test
C9.3 Marine Engine Engine Oil Filter Base - Remove and Install - Separate Circuit Keel Cooling Flange Connections - Right-Hand Simplex
Cat® Command For Hauling MID 039 - CID 0838 - FMI 02
Cat® Command For Hauling MID 039 - CID 0838 - FMI 03