3412 Generator Set Caterpillar


Boost Pressure Is High

Usage:

3412 DK6
Use this procedure in order to troubleshoot a high boost pressure or use this procedure if the following diagnostic code is active. Access the monitoring system on the Cat® Electronic Technician (ET) in order to view the current trip points for this code.

Table 1
Diagnostic Code 
Code and Description  Flash Codes  Default Conditions which Generate this Code  System Response 
102-00 Boost Pressure Sensor : High  25  The boost pressure is above the trip point for high boost pressure.  The code is logged. 

Probable Causes

  • Excessive engine load

Recommended Actions

Table 2
Troubleshooting Test Steps  Value  Results 

1. Excessive Load On the Engine. 

Engine Load 

Result : There is excessive load on the engine.

Repair : Reduce the load on the engine to an acceptable range.
 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.