Piston and Rings
Show/hide table
Illustration 1 | g03794278 |
Show/hide table
Illustration 2 | g03794268 |
Show/hide table
Specification for 431-7293 Piston     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 436-2781 Piston Ring     | Install with side marked "UP-1" toward top of the piston.     |
Thickness of the new piston ring is 2.429 to 2.473 mm (0.096 to 0.097 inch). |
|||
Clearance of the ends when assembled in a new cylinder liner of bore is 0.30 to 0.40 mm (0.012 to 0.016 inch). |
|||
Width of the groove (A) is 2.585 to 2.615 mm (0.102 to 0.103 inch). |
|||
2     | 1     | 435-5969 Piston Ring     | Install with side marked "UP-2" toward top of the piston.     |
Thickness of the new piston ring is 2.47 to 2.50 mm (0.097 to 0.098 inch). |
|||
Clearance of the ends when assembled in a new cylinder liner of bore is 0.85 to 1 mm (0.033 to 0.040 inch). |
|||
Width of groove (B) is 2.550 to 2.570 mm (0.100 to 0.101 inch). |
|||
3     | 1     | 436-2782 Ring As     | Install with side marked "UP-3" toward top of the piston..     |
Thickness of the new piston ring is 3.97 to mm (0.156 to 0.157 inch) to 3.99 mm (0.157 inch). |
|||
Clearance of the ends when assembled in a new cylinder liner of bore is 0.35 to 0.65 mm (0.014 to 0.026 inch). |
|||
Width of groove (C) is 4.020 to 4.040 mm (0.158 to 0.159 inch). |
|||
4     | 2     | 436-2785 Retaining Ring     | Install the pin retainer with the opening towards top of the piston as shown in Illustration 2.     |
5     | 1     | 436-2783 Piston Pin     | Thoroughly lubricate the piston pin with clean engine oil prior to assembly.     |
Diameter is 51.994 to 52 mm (2.0470 to 2.0474 to inch) |
|||
Bore of the bushing (D) for piston pin is 52.01 mm (2.047 inch) to 52.016 mm (2.048 inch). |
|||
6     | 1     | 436-2780 Piston     | Lubricate the entire piston to 360 degrees prior to assembly into the cylinder block. Use clean engine oil.     |
Caterpillar Information System:
C8.7 Marine Engine Expansion Tank - Remove and Install
C8.7 Marine Engines Cylinder Head Valves
C8.7 Marine Engines Main Bearing Journal
794 AC Off-Highway Truck Power Train Resistor - Remove and Install - Active Resistors - High Voltage Warning System
794 AC Off-Highway Truck Power Train Retarding Contactor - Remove and Install
3516C Marine Engines Engine Oil Pan - Remove and Install
C8.7 Marine Engine Belt Guard - Remove and Install
C8.7 Marine Engines Flywheel
3512E Tier 4 Final Engines for Land Electric Drilling Turbocharger Differential Speed Problem
C8.7 Marine Engines Heat Exchanger
3512E Tier 4 Final Engines for Land Electric Drilling Exhaust Temperature Is High
C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C8.7 Marine Engines Connecting Rod Bearing Journal
C8.7 Marine Engines Engine Oil Filter Base
G3600 A4 Engines Cooling System
C8.7 Marine Engines Flywheel Housing
G3512 Generator Set Fumes Disposal Filter Element - Inspect
794 AC Off-Highway Truck Power Train Phase Module - Remove and Install - Chopper
C8.7 and C12.9 Marine Engines Oil Filter Differential Pressure Problem
2015/03/17 Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
C8.7 and C12.9 Marine Engines Electromagnetic Clutch - Test
C8.7 and C12.9 Marine Engines ECM - Replace
794 AC Off-Highway Truck Power Train Phase Module - Remove and Install
794 AC Off-Highway Truck Power Train Interface Module - Remove and Install - Motor No. 1