Cylinder Head Valves
Show/hide table
Illustration 1 | g03795018 |
Show/hide table
Specification for 439-2812 Cylinder Head Valve Group     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 24     | 433-7073 Springs     | Length under test is 51 mm (2.00 inch) test force is 460 ± 22 N (103 ± 5 lb).. Length under test is 39 mm (1.54inch), test force is 740 ± 33 N (166 ± 7 lb). Free length after test is 71.34 mm (2.81 inch).     |
2     | 12     | 430-6044 Valve Guides (Exhaust)     | Bore in the valve guide is 8.023 - 8.038 mm (0.3158 to 0.3164 inch)..     |
3     | 12     | 435-0217 Exhaust Valves     | Face angle is 45.30 degrees. Stem diameter is 7.970 - 7.985 mm (0.31378 - 0.31437 inch)     |
4     | 12     | 430-6037 Valve Seats (Exhaust)     | Face angle is 45.30 degrees. Outside diameter is 41.060 - 41.075 mm (1.6165 to 1.6171 inch). Bore in the cylinder head for the valve seat is 40.985 - 41.020 mm (1.61358 - 1.61496 inch).     |
5     | 12     | 430-6036 Valve Seats (Inlet)     | Face angle is 60.30 degrees. Outside diameter is 42.060 - 42.075 mm (1.6559 to 1.6564 inch). Bore in the cylinder head for the valve seat is 41.985 - 42.020 mm (1.653 to 1.654 inch).     |
6     | 12     | 433-7075 Inlet Valves     | Face angle is 60.30 degrees. Stem diameter is 7.970 - 7.985 mm (0.31378 - 0.31437 inch).     |
7     | 12     | 430-6043 Valve Guides (Inlet)     | Bore in the valve guide is 8.023 - 8.038 mm (0.313 to 0.316 inch).     |
    |     |     | Valve Guide O.D. is 13.012 ± 13.025 mm (0.51228 ± 0.51279 inch)     |
    |     |     | Intake valve recession is 0.5 - 0.8 mm (0.02 - 0.032 inch). Exhaust valve recession is 1.6 ± 1.9 mm (0.063 ± 0.075 inch)     |
Caterpillar Information System:
C8.7 Marine Engines Main Bearing Journal
794 AC Off-Highway Truck Power Train Resistor - Remove and Install - Active Resistors - High Voltage Warning System
794 AC Off-Highway Truck Power Train Retarding Contactor - Remove and Install
3516C Marine Engines Engine Oil Pan - Remove and Install
C8.7 Marine Engine Belt Guard - Remove and Install
C8.7 Marine Engines Flywheel
3512E Tier 4 Final Engines for Land Electric Drilling Turbocharger Differential Speed Problem
C8.7 Marine Engines Heat Exchanger
3512E Tier 4 Final Engines for Land Electric Drilling Exhaust Temperature Is High
C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C8.7 Marine Engine Control Panel - Remove and Install
C7.1 Engines Fuel Transfer Pump - Test
C8.7 Marine Engine Expansion Tank - Remove and Install
C8.7 Marine Engines Piston and Rings
C8.7 Marine Engines Connecting Rod Bearing Journal
C8.7 Marine Engines Engine Oil Filter Base
G3600 A4 Engines Cooling System
C8.7 Marine Engines Flywheel Housing
G3512 Generator Set Fumes Disposal Filter Element - Inspect
794 AC Off-Highway Truck Power Train Phase Module - Remove and Install - Chopper
C8.7 and C12.9 Marine Engines Oil Filter Differential Pressure Problem
2015/03/17 Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
C8.7 and C12.9 Marine Engines Electromagnetic Clutch - Test
C8.7 and C12.9 Marine Engines ECM - Replace