Main Bearing Journal
Show/hide table
| Diameter of Main Bearing Journals | ||
| Journals | Diameter | Service limit |
| Standard | |
|
Clearance between the main bearing and the main bearing journal
- Standard clearance ...
0.044 to 0.102 mm (0.0017 to 0.0040 inch)
Service limit ...
Caterpillar Information System:
C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
C4.4 and C6.6 Engines Coolant Level - Test
C2.2 Engines for Caterpillar Built Machines Cylinder Head
C2.2 Engines for Caterpillar Built Machines Connecting Rod
C7.1 Engines CAN Data Link - Test
C2.2 Engines for Caterpillar Built Machines Piston and Rings
C7.1 Engines Aftertreatment Identification Module - Test
C13 Generator Set Engine Venturi Tube - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Component Location
C13 Generator Set Engine Inlet Air Temperature Sensor - Remove and Install
C13 Generator Set Engine Boost Pressure Sensor - Remove and Install
2015/05/15 A New Starter Is Now Available for Certain Cat® Generator Set Engines {1453}
793F and 793F CMD Off-Highway Truck Suspension Cylinder Valve (Suspension Cylinder Charging)
C13 Generator Set Engine Electric Starting Motor - Remove and Install
C4.4 Engines Cooling Fan Control - Test - Hydraulic Driven Fan
C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator
C2.2 Engines for Caterpillar Built Machines Camshaft
F Series Excavator Monitoring System Prestart Monitoring Function - If Equipped
2015/01/23 New Coupling Bolts and Couplings Are Used On Certain 3512C Engines {3252}
C13 Generator Set Engine Battery Charger - Remove and Install
C7.1 Engines Cooling Fan Reversing - Test - Hydraulic Driven Fan
C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C4.4 and C6.6 Engines Cooling Fan Speed - Test