C2.2 Engines for Caterpillar Built Machines Caterpillar


Connecting Rod Bearing Journal

Usage:

239D BL9

Table 1
Diameter of the Connecting Rod Bearing Journals 
Journals  Diameter  Service limit 
Standard  51.964 to 51.975 mm (2.04582 to 2.04626 inch)  51.90 mm (2.0433 inch) 
Undersize 0.25 mm (0.010 inch)  51.714 to 51.725 mm (2.03598 to 2.03641 inch)  51.65 mm (2.0335 inch) 
Undersize 0.50 mm (0.020 inch)  51.464 to 51.475 mm (2.02614 to 2.02660 inch)  51.40 mm (2.0236 inch)(1) 
(1) If the diameter of the connecting rod bearing journal is less than the maximum undersize service limit, the crankshaft must be replaced.

Clearance between the connecting rod bearing and the connecting rod bearing journal

Standard clearance ... 0.035 to 0.085 mm (0.00138 to 0.00335 inch)
Service limit ... 0.20 mm (0.0079 inch)

Caterpillar Information System:

C4.4 and C6.6 Engines Coolant Level - Test
C2.2 Engines for Caterpillar Built Machines Cylinder Head
C2.2 Engines for Caterpillar Built Machines Connecting Rod
C7.1 Engines CAN Data Link - Test
C2.2 Engines for Caterpillar Built Machines Piston and Rings
C7.1 Engines Aftertreatment Identification Module - Test
C13 Generator Set Engine Venturi Tube - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Component Location
C13 Generator Set Engine Inlet Air Temperature Sensor - Remove and Install
C13 Generator Set Engine Boost Pressure Sensor - Remove and Install
2015/05/15 A New Starter Is Now Available for Certain Cat® Generator Set Engines {1453}
C13 Generator Set Engine Pressure Sensor (NRS Absolute) - Remove and Install
C2.2 Engines for Caterpillar Built Machines Main Bearing Journal
793F and 793F CMD Off-Highway Truck Suspension Cylinder Valve (Suspension Cylinder Charging)
C13 Generator Set Engine Electric Starting Motor - Remove and Install
C4.4 Engines Cooling Fan Control - Test - Hydraulic Driven Fan
C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator
C2.2 Engines for Caterpillar Built Machines Camshaft
F Series Excavator Monitoring System Prestart Monitoring Function - If Equipped
2015/01/23 New Coupling Bolts and Couplings Are Used On Certain 3512C Engines {3252}
C13 Generator Set Engine Battery Charger - Remove and Install
C7.1 Engines Cooling Fan Reversing - Test - Hydraulic Driven Fan
C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.