Inlet Air Temperature Sensor - Remove and Install
- Disconnect harness assembly (1) and remove inlet air temperature sensor (2).
Show/hide table
| |
| Illustration 1 | g03784091 |
- Install inlet air temperature sensor (2) in the reverse order of removal.
- Tighten inlet air temperature sensor (2) to a torque of
20 ± 3 N·m (177 ± 27 lb in) .
- Tighten inlet air temperature sensor (2) to a torque of
Caterpillar Information System:
C13 Generator Set Engine Boost Pressure Sensor - Remove and Install
2015/05/15 A New Starter Is Now Available for Certain Cat® Generator Set Engines {1453}
C13 Generator Set Engine Pressure Sensor (NRS Absolute) - Remove and Install
C13 Generator Set Engine Pressure Sensor (NRS Differential) - Remove and Install
C13 Generator Set Engine Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
C2.2 Engines for Caterpillar Built Machines Crankshaft
C13 Generator Set Engine Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Generator Set Engine Pressure Sensor (DPF) - Remove and Install
Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052} Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052}
C13 Generator Set Engine Temperature Sensor (Catalyst Inlet) - Remove and Install
Final Drive Motor Housings Are Available for Certain Excavators {4050} Final Drive Motor Housings Are Available for Certain Excavators {4050}
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is Low
3516B Generator Set Engines with Dynamic Gas Blending Component Location
C13 Generator Set Engine Venturi Tube - Remove and Install
C7.1 Engines Aftertreatment Identification Module - Test
C2.2 Engines for Caterpillar Built Machines Piston and Rings
C7.1 Engines CAN Data Link - Test
C2.2 Engines for Caterpillar Built Machines Connecting Rod
C2.2 Engines for Caterpillar Built Machines Cylinder Head
C4.4 and C6.6 Engines Coolant Level - Test
C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
C2.2 Engines for Caterpillar Built Machines Main Bearing Journal
793F and 793F CMD Off-Highway Truck Suspension Cylinder Valve (Suspension Cylinder Charging)
C13 Generator Set Engine Electric Starting Motor - Remove and Install