C280 Marine Engines Caterpillar


Water Pump

Usage:

C280-08 J4R


Illustration 1g03779349
Typical example

Table 1
Specification for 457-5094 Water Pump Gp, and 457-5095 Water Pump Gp 
Item  Qty  Part  Specification Description 
3B-2968 Bolt  Before assembly, lubricate washer face and thread with black Loctite Graphite-50.
Do not lubricate on impeller face. 
292-5982 Face Seal Gp  Lubricate the bore lightly with 5P-3975 Rubber Lubricant. 
6V-7701 O-Ring Seal  Lubricate the bore lightly with 5P-3975 Rubber Lubricant. 
9S-8007 Plug  Torque to 8 ± 1 N·m (71 ± 9 lb in)

Caterpillar Information System:

C280 Marine Engines Crankcase Breather
C280 Marine Engines Water Pump
C280 Marine and Petroleum Engines Camshaft Bearing Position
C280 Marine and Petroleum Engines Air Shutoff
464-4043 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000} 464-4043 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000}
2015/01/16 Improved Exciter Rotor is Now Used On Certain Cat® Products {4454}
2015/01/30 New Special Instruction Is Now Available for Inspecting, Insulating, and Repairing Stator Lead Cables Used on Certain Generator Sets {1408, 4459}
Instructions for Inspecting, Insulating, and Repairing Stator Lead Cables on Certain Engines and Generator Sets{1408, 4459} Instructions for Inspecting, Insulating, and Repairing Stator Lead Cables on Certain Engines and Generator Sets{1408, 4459}
3516C Marine Engines Fumes Disposal Filter
464-6603 Top End Overhaul Foundational Kit for 3516 Generator Set Engines{1000} 464-6603 Top End Overhaul Foundational Kit for 3516 Generator Set Engines{1000}
3516C Marine Engines Auxiliary Sea Water Pump
C280 Marine Engines Turbocharger Inlet Pressure Sensor
C280 Marine Engines Water Pump
C280 Marine Engines Water Pump
C280 Marine and Petroleum Engines Aftercooler
C280 Marine Engines Fuel Priming Pump
C280 Marine Engines Engine Oil Scavenge Pump
C280 Marine Engines Aftercooler
C4.4 and C6.6 Engines Oil Level Is Low
C280 Marine Engines Turbocharger
C4.4 and C7.1 Engines Oil Pressure Is Low
C280 Marine Engines Vibration Damper
G3600 A4 Engines Gear Group (Front)
2014/12/19 A Cup Plug is Required for Replacement Cylinder Blocks on Certain 3054C and C4.4 (Mech) Engines {0663, 1201}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.