464-4043 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000} Caterpillar

Engine:

3516 (S/N: CMD1-UP; ZAL1-UP; YAS1-UP; 8TW1-UP; 25Z1-UP)

Introduction

This Special Instruction is intended to provide information on the Engine Overhaul Kit Consist and detailed information on specific parts that should be used based on engine arrangements.

This Engine Overhaul Kit may contain extra parts and extra quantities due to the variety of engine arrangements assigned to a given kit. Refer to the corresponding Parts Manual or Disassembly and Assembly manual in Table 1.

Note: This Kit may contain upgraded parts. These upgraded part numbers may be different than what you have in the parts manual or engine, but these parts have been technically reviewed for compatibility with your application.

Note: This kit contains gasket kits and includes additional parts needed to perform an engine overhaul.

Note: This kit does not contain rod bearings, main bearings, and thrust plates.

Note: For more information, visit us at: electricpowersupport.cat.com.

Note: For assistance with technical questions, contact your local Cat dealer.

Reference Material

Note: For ordering reference material, contact your local Cat dealer.

3516 Generator Set 464-4043 Major Overhaul Kit Consist

3516 Generator Set Engine Gasket Kit Locations

Illustration 1	g03779704
(1) Turbocharger Installation (464-0898 Gasket Kit) (2) Single Cylinder Head (464-0896 Gasket Kit) (3) Oil Cooler and Lines (462-0795 Gasket Kit) (4) Front Structure (464-0894 Gasket Kit) (5) Rear Structure (463-9569 Gasket Kit)

Gasket Kit Consists

Oil Cooler and Lines (462-0795 Gasket Kit)

Refer to Illustration1.

Rear Structure (463-9569 Gasket Kit)

Refer to Illustration 1.

Front Structure (464-0894 Gasket Kit)

Refer to Illustration 1.

Single Cylinder Head (464-0896 Gasket Kit)

Refer to Illustration 1.

Turbocharger Installation (464-0898 Gasket Kit)

Refer to Illustration 1.