Turbocharger
Show/hide table
Illustration 1 | g06167745 |
Typical example |
Show/hide table
Specification for 390-3924 Turbocharger Gp and 390-3925 Turbocharger Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 6 | 200-8038 Bolt | Before assembly, apply Loctite C5A copper anti-seize to the threads.
Torque to |
2 | 4 | 164-5070 Plug | Torque to |
3 | 18 | 5A-3604 Bolt | Before assembly, apply Loctite 648 to the threads.
Torque to |
4 | 1 | 163-5497 Screw | Before assembly, apply green Loctite 648 to the threads. |
5 | 6 | 163-6443 Bolt | Before assembly, apply green Loctite 648 to the threads.
Torque to |
6 | 1 | 445-7794 Compressor Wheel | Before assembly, apply Loctite C5A copper anti-seize to the threads.
Torque to |
7 | - | - | Apply Before assembly, apply black Loctite 593 to the bearing housing. Assemble outlet housing to bearing housing within 5 minutes of applying the sealant. Sealant must be cured for minimum 2 hours before turbocharge is put into service. |
Show/hide table
Illustration 2 | g06167747 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
8 | 1 | 200-8029 Speed Sensor Gp | Torque to |
9 | 7 | 8T-4244 Nut | Torque to |
Show/hide table
Illustration 3 | g06167749 |
Inlet assembly |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
10 | 2 | 164-5469 Plug | Torque to |
Caterpillar Information System:
Generators for C15/C18 Engines Voltage Regulators
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Engine Oil Coolers - Assemble
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Engine Oil Coolers - Disassemble
336F XE Excavator Production Measurement Application
2014/12/19 Replacing the Hazardous Location Customer Connection Harness on Certain C9 and C15 Commercial Engines {1403, 1408}
2014/12/24 Accurate Diagnosis of Turbocharger Failure on Certain G3500 Engines {1052}
C3.4B Engines ECM Software - Install
C13 Industrial Engine Temperature Sensor - Remove and Install - DPF Inlet, SCR Inlet
C4.4 and C6.6 Engines Oil Contains Fuel
C4.4 and C7.1 Engines Oil Contains Coolant
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Engine Oil Coolers - Remove and Install
C15 Generator Set Generator Set - Test
C280 Marine Engines Camshaft
C280 Marine and Petroleum Engines Cylinder Block
C280 Marine Engines Cylinder Liner
C280 Marine and Petroleum Engines Fuel Injection Lines
C280 Marine Engines Connecting Rod
C280 Marine Engines Crankshaft Seals
C280 Marine Engines Cylinder Block
C280 Marine Engines Housing (Front)
C280 Marine Engines Piston and Rings
C280 Marine Engines Flywheel
Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606} Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606}
C9.3 Marine Engines Fuel Pressure Sensor