C13 Industrial Engine Caterpillar

Maintenance Interval Schedule - Standard

Usage:

C13 JR9

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.

When Required

Battery - Recycle
Battery - Replace
Battery or Battery Cable - Disconnect
DEF Filler Screen - Clean
Diesel Exhaust Fluid - Fill
Engine - Clean
Engine Air Cleaner Element (Dual Element/Box Type) - Replace
Engine Air Cleaner Element (Dual Element/Canister Type) - Clean/Replace
Engine Air Cleaner Element (Single Element/Canister Type) - Clean/Replace
Engine Storage Procedure - Check
Fuel System - Prime
Fuel Tank Water and Sediment - Drain
Radiator - Clean

Daily

Air Tank Moisture and Sediment - Drain
Coolant Level - Check
Driven Equipment - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Power Take-Off Clutch - Check
Walk-Around Inspection

Every 6000 Service Hours or 6 Years

Coolant Extender (ELC) - Add

Every 492 100 L (130 000 US gal) of Fuel

Overhaul Considerations

Every 10 000 Service Hours

DEF Manifold Filters - Replace

Every 12 000 Service Hours or 6 Years

Coolant (ELC) - Change

Every 250 Service Hours

Belts - Inspect/Replace
Engine Oil Sample - Obtain
Grounding Stud - Inspect/Clean/Tighten

Initial 500 Service Hours

Engine Valve Lash - Check

Every 500 Service Hours

Battery Electrolyte Level - Check
Belts - Inspect/Adjust/Replace
Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Hoses and Clamps - Inspect/Replace

Every 2000 Service Hours

Air Shutoff - Test

Every 2000 Service Hours or 1 Year

Coolant Sample (Level 2) - Obtain
Fumes Disposal Filter Element - Replace

Every 2500 Service Hours

Compression Brake - Inspect/Adjust/Replace
Engine Valve Lash - Check

Every 3000 Service Hours or 3 Years

Coolant (DEAC) - Change

Every 4000 Service Hours

Air Compressor - Check
Engine Mounts - Inspect
Starting Motor - Inspect

Every 5000 Service Hours

Diesel Exhaust Fluid Filter - Replace
Diesel Particulate Filter - Clean
Injector (Diesel Exhaust Fluid) - Replace

Caterpillar Information System:

C13 Industrial Engine Engine Stopping

320 GC, 320 and 323 Excavator Machine Systems Specifications Track

323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Coupler Lines

Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107} Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}

459-3143 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 459-3143 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}

323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Stick Cylinder Lines

C13 Industrial Engine Diesel Particulate Filter Collects Excessive Soot

G3520H Generator Set Engine Water Pump - Assemble

G3520H Generator Set Engine Water Pump - Disassemble

320D2 and 323D2 Excavators Hydraulic System Hydraulic Oil Cooler

323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lines

459-1187 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 459-1187 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}

2014/10/14 Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}

2014/12/05 Cat® Reman Announces The Availability of a Multitude of Electronic Control Groups {1901}

150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171} 150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}

458-7125 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-7125 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}

G3520H Generator Set Engine Engine Oil Pump - Assemble

C13 Industrial Engine Product Storage

3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Sensor Signal (PWM) - Test

3512E Tier 4 Final Engines for Land Electric Drilling Fuel Pressure Is High

794 AC Off-Highway Truck Engine Supplement Radiator - Remove and Install

C3.4B Engines Speed/Timing - Test

C280 Marine Engines Turbocharger Differential Speed Problem

458-7290 Major Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 458-7290 Major Overhaul Foundational Kit for 3508 Petroleum Engines{1000}