C175-16 PETROLEUM ENGINES Caterpillar


Engine Oil Pan - Remove

Usage:

C175-16 P6L

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
422-2352  支撑支座组件 
422-5472  吊耳组件 
323-1146  发动机提升设备 

开始:

  1. 拆下发动机机油泵。

  1. 将蓄电池断路开关转到断开位置。

  2. 将燃油供应阀转到断开位置。


    注意

    在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。


  3. 放掉发动机机油。 有关正确的排放和加注步骤,请参阅操作和保养手册, "发动机机油和滤清器 - 更换"。


    图 1g03733492

  4. 断开软管组件 (1) 和软管组件 (2)。

  5. 拆下支架组件 (3)、盖组件 (4)、盖组件 (5) 和盖组件 (6)。


    图 2g03733749

  6. 拆下螺栓 (7) 和盖组件 (8)。


    图 3g03734024

  7. 拆下支架 (9) 和螺栓 (10)。


    图 4g03733938

  8. 将工具 (C) 安装到卸下盖组件 (8) 和支架 (9) 的位置。


    图 5g03734059

  9. 拆下螺栓 (11)。


    图 6g03734261

  10. 将适当的起吊设备连接到工具 (C) 上。 发动机的重量约为 11818 kg (26054 lb)

  11. 拆下螺栓 (12)、螺栓 (13)(未显示),然后将发动机从发动机油底壳 (14) 上拆下。


    图 7g02415416

  12. 将发动机安置到工具 (A) 上。


    图 8g03734847

  13. 将工具 (B) 和适当的起吊设备连接到发动机油底壳 (14) 上。 发动机油底壳 (14) 的重量约为 958 kg (2108 lb)

  14. 拆下螺栓 (15) 和发动机油底壳 (14)。

Caterpillar Information System:

323F SA and 323F LN Excavator Safety Messages
C7 and C9 Industrial Engines Sensor Signal (Analog, Passive) - Test
Selective Catalytic Reduction Retrofit Aftertreatment Sensor (Data Link Type) - Test
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Grease Lines
794 AC Off-Highway Truck Machine Systems Electric Retarder - Remove and Install
C3.4B Engines Solenoid Valve - Test
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Auxiliary Hydraulic Lines
Procedure to Pin the Turbocharger Housing on Certain 3512C and 3516C Marine Engines {1052} Procedure to Pin the Turbocharger Housing on Certain 3512C and 3516C Marine Engines {1052}
C7 and C9 Industrial Engines Sensor Signal (Analog, Active) - Test
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Front Lines
320D3 and 323D3 Excavators Machine System Specifications Hood
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lighting
C7 and C9 Industrial Engines Speed/Timing - Test
2014/10/10 Cat ® Reman Announces The Availability of a Multitude of Electronic Control Groups {1901}
323F SA and 323F LN Excavator Mirror - If Equipped
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lines
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lines
C3.4B Engines Solenoid Valve - Test - Coolant Diverter Valve
459-1187 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000} 459-1187 Top End Overhaul Foundational Kit for 3508 Petroleum Engines{1000}
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lines
320D2 and 323D2 Excavators Hydraulic System Hydraulic Oil Cooler
G3520H Generator Set Engine Water Pump - Disassemble
G3520H Generator Set Engine Water Pump - Assemble
C13 Industrial Engine Diesel Particulate Filter Collects Excessive Soot
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.