Turbocharger
Show/hide table
| |
| Illustration 1 | g03698359 |
Show/hide table
| Specification for 256-4500 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 372-5858 Band Clamp | Use the following procedure in order to tighten the nut of the band clamp:
Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize. 1. Tighten the first nut approximately 2. Tighten the second nut approximately to 3. Then, tighten the first nut to 4. Gently hit around the band clamp with a soft hammer. 5. Again, tighten the first nut to 6. Then tighten the second nut to 7. Again, gently hit around the band clamp with a soft hammer. 8. Finally, tighten both the nuts to |
| 2 | 2 | 330-9746 Connector As | Before assembly, apply black Loctite Gasket Maker #2 to the threads. |
| 3 | 24 | 293-5490 Bolt | Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize.
Torque to |
Caterpillar Information System:
C3.4B Engines for Caterpillar Built Machines Compression - Test
C3.4B Engines for Caterpillar Built Machines Cylinder Head - Inspect
C3.4B Engines for Caterpillar Built Machines Basic Engine
C3.4B Industrial Engine Diesel Exhaust Fluid Tank - Flush
C3.4B Industrial Engine Fluid Recommendations
C3.4B Industrial Engine Refill Capacities
3516C and C175-16 Engines Selective Catalytic Reduction Electrical Power Supply - Test
3516C and C175-16 Engines Selective Catalytic Reduction Solenoid Valve - Test
3516C and C175-16 Engines Selective Catalytic Reduction Sensor Signal (Analog, Passive) - Test
3516C and C175-16 Engines Selective Catalytic Reduction Sensor Supply - Test
3516C and C175-16 Engines Selective Catalytic Reduction Data Link - Test
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Emergency Stop - Test
C175-16 Marine Propulsion Engines Turbocharger
C3.4B Engines Electronic Service Tools
C175-16 Marine Propulsion Engines Water Pump
C4.4 Industrial Engine Product Lifting - Aftertreatment Systems
C175-16 Marine Propulsion Engines Engine Harness
C8.7 Marine Engine Hoses and Clamps - Inspect/Replace
Well Service Pumps Pump (Power End) Lube Oil Filter - Replace
C7.1 Industrial Engine Selective Catalytic Reduction Warning System
Well Service Pumps Pump (Power End) Lube Suction Strainer - Clean
C9-XQ300 Rental Generator Set Maintenance Interval Schedule - Standard
C9-XQ300 Rental Generator Set Maintenance Interval Schedule - Standby
3516C and C175-16 Engines Selective Catalytic Reduction DEF Pump Heater - Test