Fuel Priming Pump - Remove and Install
拆卸步骤
Show/hide table
| 注意 |
|---|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下螺栓 (1 ) 。
Show/hide table
 | |
| 图 1 | g03685510 |
- 拆下燃油注油泵 (2) 和垫片。
安装步骤
- 将衬垫和燃油注油泵 (2) 安置到燃油滤清器座上。
Show/hide table
 | |
| 图 2 | g03685518 |
- 安装螺栓 (1) 。
Caterpillar Information System:
XQC1200 and XQC1600 Power Modules Turbocharger - Remove and Install
Electronic Fluid Temperature Control (ESTAT) Salvage Guideline {0374, 0599, 0700, 0701, 0708, 135V} Electronic Fluid Temperature Control (ESTAT) Salvage Guideline {0374, 0599, 0700, 0701, 0708, 135V}
C9 Generator Set Safety Messages
C175-16 PETROLEUM ENGINES High Pressure Fuel Rails - Remove and Install
G3306B Petroleum Generator Set Engines Oxygen Level - Test
G3306B Petroleum Generator Set Engines System Configuration Parameters
G3306B Petroleum Generator Set Engines Fuel Pressure Is Low
G3306B Petroleum Generator Set Engines Engine Control Panel
2014/09/11 New Steering Line Assembly Is Now Available on Certain 621H, 623H, and 627H Wheel Tractor-Scrapers {4304, 5050}
2014/06/20 An Improved Inspection Process for Cylinder Liners Used in All 3500 Engines {1201, 1216}
C3.4B Engines for Caterpillar Built Machines Gear Group (Front)
C9 Generator Set Coolant (DEAC) - Change
C27 and C32 Generator Set Engines Fuel Filter Base - Remove
C27 and C32 Generator Set Engines Fuel Filter Base - Install
C27 and C32 Generator Set Engines Turbocharger - Disassemble
G3306B Petroleum Generator Set Engines Electrical Connectors
455-1188 Major Overhaul Foundational Kit for C18 Marine Engines{1000} 455-1188 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
Customer Assembly Requirements for C3.4B Engine {1000, 108D} Customer Assembly Requirements for C3.4B Engine {1000, 108D}
C4.4 Engines for Caterpillar Built Machines Crankshaft Timing Ring - Remove and Install
The Check Ball in the Spool Assembly of the Main Relief Valve May be Missing on Various Products{3133, 3182, 3210, 3213} The Check Ball in the Spool Assembly of the Main Relief Valve May be Missing on Various Products{3133, 3182, 3210, 3213}
Procedure for Installing the Continuous Engine Prelube Oil Pump Group and Lines Group for Certain 3508 Fire Pump Engines{1307, 1319} Procedure for Installing the Continuous Engine Prelube Oil Pump Group and Lines Group for Certain 3508 Fire Pump Engines{1307, 1319}
C27 and C32 Generator Set Engines Turbocharger - Assemble
C27 and C32 Generator Set Engines Atmospheric Pressure Sensor - Remove and Install
C4.4 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install