C3.4B Engines for Caterpillar Built Machines Caterpillar

Lifter Group

Usage:

CCS7 4B2

Show/hide table




Illustration 1	g02488296
Typical example (B) 26 mm (1.02362 inch) (D) 38 ± 0.25 mm (1.49606 ± 0.00984 inch)

(A) Diameter of the lifter body ... 14.780 ± 0.04 mm (0.58189 ± 0.00157 inch)

(C) Height of the lifter body ... 65 ± 0.2 mm (2.55905 ± 0.00787 inch)

(E) Diameter of the lifter body ... 14.780 ± 0.02 mm (0.58189 ± 0.00079 inch)

(F) Diameter of the lifter body ... 14.970 ± 0.04 mm (0.58937 ± 0.00157 inch)

Bore diameter in the cylinder block ... 15.4 to 15.6 mm (0.60630 to 0.61417 inch)

Clearance

Clearance of the lifter ... 0.020 to 0.054 mm (0.00079 to 0.00213 inch)

Caterpillar Information System:

TA2 Technical Inspection for 3512C Dynamic Gas Blending Marine Engines{0372, 1000, 753T, 7565} TA2 Technical Inspection for 3512C Dynamic Gas Blending Marine Engines{0372, 1000, 753T, 7565}

C3.4B Engines for Caterpillar Built Machines Piston and Rings

C3.4B Engines for Caterpillar Built Machines Connecting Rod

C3.4B Engines for Caterpillar Built Machines Main Bearing Journal

C4.4 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install

C3.4B Engines for Caterpillar Built Machines Connecting Rod Bearing Journal

C8.7 Marine Engine Engine Oil Level Gauge - Calibrate

C3.4B Engines for Caterpillar Built Machines Camshaft Bearings

C4.4 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install - Top Mounted Exhaust Manifold

C4.4 Engines for Caterpillar Built Machines Refrigerant Compressor - Remove and Install

C4.4 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install - Engines with a Balancer Unit

C4.4 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install - Engines Without a Balancer Unit

C3.4B Engines for Caterpillar Built Machines Cylinder Head Valves

C3.4B Engines for Caterpillar Built Machines Water Temperature Regulator and Housing

C8.7 Marine Engine Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace

Instructions for Use of Cat® Coolant Conditioner for Modular Core Aluminum Radiators {1350, 1350, 1352, 1353, 1395} Instructions for Use of Cat® Coolant Conditioner for Modular Core Aluminum Radiators {1350, 1350, 1352, 1353, 1395}

C9 Generator Set Coolant (DEAC) - Change

C3.4B Engines for Caterpillar Built Machines Gear Group (Front)

2014/06/20 An Improved Inspection Process for Cylinder Liners Used in All 3500 Engines {1201, 1216}

2014/09/11 New Steering Line Assembly Is Now Available on Certain 621H, 623H, and 627H Wheel Tractor-Scrapers {4304, 5050}

G3306B Petroleum Generator Set Engines Engine Control Panel

G3306B Petroleum Generator Set Engines Fuel Pressure Is Low

G3306B Petroleum Generator Set Engines System Configuration Parameters

G3306B Petroleum Generator Set Engines Oxygen Level - Test