Rocker Shaft
Show/hide table
Illustration 1 | g02842156 |
Typical example |
(1) Inlet rocker arm
- Diameter of the rocker arm bore ...
19.020 to 19.041 mm (0.74882 to 0.74964 inch)
(2) Exhaust rocker arm
- Diameter of the rocker arm bore ...
19.020 to 19.041 mm (0.74882 to 0.74964 inch)
Clearance
- Maximum clearance of both the rocker arm bores. ...
0.020 to 0.054 mm (0.00079 to 0.00213 inch)
(3) Diameter of the rocker shaft ...
Show/hide table
Illustration 2 | g02681778 |
Tightening sequence |
Tighten the fasteners in the sequence that is in illustration 2. Tighten the fasteners to an initial torque. ...
Tighten the fasteners in the sequence that is in illustration 2. Tighten the fasteners to a final torque. ...
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Balancer - Install
C4.4 Engines for Caterpillar Built Machines Balancer - Remove
793F and 797F Off-Highway Trucks Braking System E653 Low Secondary Brake Accumulator Pressure
C3.4B Engines for Caterpillar Built Machines Cylinder Head
C4.4 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install
C4.4 Engines for Caterpillar Built Machines Turbocharger - Install - Top Mounted Turbocharger
C4.4 Engines for Caterpillar Built Machines Turbocharger - Remove - Top Mounted Turbocharger
C4.4 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C4.4 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C4.4 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C4.4 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C4.4 Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
C4.4 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install - Engines Without a Balancer Unit
C4.4 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install - Engines with a Balancer Unit
C4.4 Engines for Caterpillar Built Machines Refrigerant Compressor - Remove and Install
C4.4 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install - Top Mounted Exhaust Manifold
C3.4B Engines for Caterpillar Built Machines Camshaft Bearings
C8.7 Marine Engine Engine Oil Level Gauge - Calibrate
C3.4B Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
C4.4 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
C3.4B Engines for Caterpillar Built Machines Main Bearing Journal
C3.4B Engines for Caterpillar Built Machines Connecting Rod
C3.4B Engines for Caterpillar Built Machines Piston and Rings
TA2 Technical Inspection for 3512C Dynamic Gas Blending Marine Engines{0372, 1000, 753T, 7565} TA2 Technical Inspection for 3512C Dynamic Gas Blending Marine Engines{0372, 1000, 753T, 7565}