Vibration Damper Bolts Break on C175-16 Petroleum Engines{1205, 7553}
- Engine:
- C175-16 (S/N: P6L1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
While the engine is running, the heads of the vibration damper mounting bolts may break.
Solution
On engines with or without broken bolts:
- Mark the four 274-7709 Bolts in the countersunk locations.
- Remove all of the damper bolts and discard the four marked bolts and the existing spacer plate.
Caterpillar Information System:
C175-16 PETROLEUM ENGINES Electronic Control Module (Engine) - Remove and Install
793F and 797F Off-Highway Trucks Braking System E525 High Brake Pump Pressure
793F and 797F Off-Highway Trucks Braking System E239/E240 Rear Parking Brake Dragging
C4.4 and C7.1 Engines Sensor Supply - Test
326F Excavator Machine System Specifications Track Roller (Single Flange)
330D2 Excavators Machine System Specifications Track Roller (Single Flange)
793F and 797F Off-Highway Trucks Braking System Service Brake Cooling Temperature Is High
793F and 797F Off-Highway Trucks Braking System Hoist Pilot Pressure Is Low
793F and 797F Off-Highway Trucks Braking System Hoist Pilot Pressure Is High
793F and 797F Off-Highway Trucks Braking System Parking Brake Pressure Is Low
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490}
3516C and C175-16 Engines Selective Catalytic Reduction SCR Catalyst Sulfation Is Excessive
793F and 797F Off-Highway Trucks Braking System E526 Brake Pump Pressure Not Responding to Command
UPS 750 Uninterruptible Power Supply User Interface
793F and 797F Off-Highway Trucks Braking System E527 High Brake Pump Command
C4.4 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C4.4 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fan - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fan Drive - Remove and Install
C4.4 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
XQC1200 and XQC1600 Power Modules Aftercooler - Remove and Install
C4.4 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
C4.4 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C4.4 Engines for Caterpillar Built Machines Rocker Shaft - Assemble