Venturi Tube - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 207-1601     | Rubber Lubricant     | -     |
- Remove cable straps (2). Disconnect harness assemblies (1) and (3). Loosen clamp (7) and remove clamp (4), tube (5), and hose (6) .
Show/hide table
Illustration 1 | g03662489 |
- Loosen clamp (10) and return venturi tube (8) and hose (9) .
Show/hide table
Illustration 2 | g03662750 |
- Do not reuse clamp (10) and hose (9) .
- Remove bolts (11) and pressure sensor (NRS differential) (13) from venturi tube (9). Remove pressure sensor (NRS absolute) (12) from venturi tube (8) .
Show/hide table
Illustration 3 | g03662791 |
Installation Procedure
- Install venturi tube (8) in the reverse order of removal.
Note: Do not reuse clamp (4), clamp (7), and hose (6) .
- Tighten pressure sensor (12) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
- Tighten bolts (11) to a torque of 20 ± 2 N·m (177 ± 18 lb in).
- Replace hoses (6) and (9) .
- Replace clamps (7) and (10 ) .
- Replace clamp (4) .
- Use Tooling (A) to lubricate the inner part of clamp (4)
- Tighten clamp (4) to a torque of 8.5 ± 2 N·m (75 ± 18 lb in).
Caterpillar Information System:
794 AC Off-Highway Truck Towing the Machine
C9.3 Engines for Caterpillar Built Machines Venturi Tube - Remove and Install
794 AC Off-Highway Truck Jacking Locations
C175-16 Petroleum Engines Engine Harness
C4.4 Marine Generator Set Temperature Sensor (Exhaust)
C7.1 Marine Engine Coolant Temperature Sensor - Coolant Temperature Shutdown
C175-16 Petroleum Engines Control Panel (Engine) - Circuit Breaker
C175-16 Marine Propulsion Engines Crankcase Breather
C4.4 Marine Generator Set Engine Coolant Pressure Sensor
C175-16 Petroleum Engines Control Panel (Engine) - Circuit Breaker
C175-16 Petroleum Engines Oil Mist Detector
C7.1 Marine Engine Fuel Pressure Sensor - M.C.S. Fuel Pressure Sensors
G3306B Generator Sets Generator Operation
C13 Engine for Caterpillar Built Machines Venturi Tube - Remove and Install
794 AC Off-Highway Truck Disabled Machine Recovery
794 AC Off-Highway Truck Towing With Inoperable Engine
390F Excavator Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
794 AC Off-Highway Truck Engine Starting with Jump Start Cables
C13 Industrial Engine Venturi Tube - Remove and Install
3512C Engine Fuel Transfer Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines Venturi Tube - Remove and Install
794 AC Off-Highway Truck Prepare the Machine for Maintenance
794 AC Off-Highway Truck Adapter Bearing (Blower Fan) - Lubricate
794 AC Off-Highway Truck Air Cooling Duct - Check/Clean - Outlet Screens