Power Take-Off Rotation Is Opposite of Crankshaft Rotation for Certain C32 Marine Engines {1165, 1202}
- Marine Engine:
- C32 MARINE (S/N: RSD1-UP; RPM1-UP; SDN1-UP)
- C32 MARINE GS (S/N: DSJ1-UP; RTK1-UP)
All rear Power Take-Off (PTO ) rotation is now opposite of engine crankshaft rotation for the C32 Marine engines listed above. The rotation of the PTO drive is clockwise (CW) when viewed from the rear of the engine as shown in the image below.
Show/hide table
 | |
| Illustration 1 | g03570757 |
(1) Left service PTO (2) Right service PTO (3) Crank gear (Counter Clockwise Rotation) | |
Caterpillar Information System:
C4.4 Marine Generator Set Maintenance Interval Schedule
C4.4 Marine Generator Set Welding on Engines with Electronic Controls
C4.4 Marine Generator Set Refill Capacities
C4.4 Marine Generator Set Starting with Jump Start Cables
C4.4 Marine Generator Set Overspeed
C4.4 and C7.1 Engines Switch Circuits - Test
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Hydraulic System Oil Temperature Is High
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Data Link - Test
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Hydraulic Filter Is Restricted
C4.4 Marine Generator Set Product Lifting
C4.4 Marine Generator Set Emissions Certification Film
C4.4 Marine Generator Set Plate Locations and Film Locations
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Hydraulic System Pressure Is High
390F MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Main) - Test and Adjust
390F MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Line) - Test and Adjust
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Water System Pressure Is Low
C4.4 Marine Generator Set Aftercooler Condensate Drain Valve - Inspect/Clean
3516C Marine Engine Maintenance Interval Schedule
C4.4 Marine Generator Set Belt Tensioner - Check
2014/02/21 Updated Cooling System Testing and Shunt Line Connection Points Are Now Used on Tier 4 Interim and Tier 4 Final C9 Through C18 Industrial Engines {1355, 1380, 1393}
C4.4 Marine Generator Set System Overview
C4.4 Marine Generator Set Belt - Inspect
Updated Cooling System Test and Proper Shunt Line Connection Points For Tier 4 Interim and Tier 4 Final C9 Through C18 Commercial Engines{1355, 1380, 1393} Updated Cooling System Test and Proper Shunt Line Connection Points For Tier 4 Interim and Tier 4 Final C9 Through C18 Commercial Engines{1355, 1380, 1393}