Air Starting Motor - Remove and Install
- Disconnect hose assembly (1), hose assembly (2), and pipe (3).
Show/hide table
Illustration 2 g03531280 - Disconnect hose assembly (4), and hose assembly (7).
- Remove nuts (5) and control valve (6).
Show/hide table
Illustration 3 g03531560 - Remove nuts (9) and control valve (8).
Show/hide table
Illustration 4 g03531797 - Remove bolts (10) and air starting motor (11). Air starting motor (11) weighs approximately
23 kg (51 lb) .
Show/hide table
Illustration 1 | g03531050 |
- Install air starting motor (11) in the reverse order of removal.
Caterpillar Information System:
C280-16 Engine Prelubrication Oil Pump - Remove and Install
C15 and C18 On-Highway Engines Belt Tensioner - Remove and Install - Alternator Belt Tensioner
Exhaust Balance Valve Causing Regeneration Issues On Certain Tier 4i C13 Engines{1061, 5479} Exhaust Balance Valve Causing Regeneration Issues On Certain Tier 4i C13 Engines{1061, 5479}
C15 and C18 On-Highway Engines Belt Tensioner - Remove and Install - Fan Belt Tensioner
C15 and C18 On-Highway Engines Inlet Air Temperature Sensor - Remove and Install
C15 and C18 On-Highway Engines Boost Pressure Sensor - Remove and Install
C15 and C18 On-Highway Engines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Outlet Pressure
C11 and C13 On-Highway Engines Compression Brake Lash - Adjust
C15 and C18 On-Highway Engines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412} A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
C15 and C18 On-Highway Engines Front Cover - Remove and Install
C280-16 Engine Crankcase Explosion Relief Valve - Remove and Install
C15 and C18 On-Highway Engines Valve Mechanism Cover Base - Remove and Install
C4.4 Industrial Engine Engine Operation
C4.4 Industrial Engine Fuel Related Components in Cold Weather
C9.3 Tier 4 Final Engines Flexible Exhaust Pipe
C4.4 Engines for Caterpillar Built Machines Connecting Rod - Inspect
C4.4 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (PWM) - Test
390F MHPU Mobile Hydraulic Power Unit Storage Box
G3600 A4 Engines Oil Pressure Is High
2013/11/25 Temperature Display Issue Resolved in the Latest Version of Caterpillar Electronic Technician (Cat ® ET) for G3600 Engines {0785, 1901}
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Turbocharger