Engine Crankcase Breather Element - Replace
Show/hide table
NOTIFICARE |
---|
Asiguraţi-vă că motorul este oprit înainte de a efectua operaţiuni de service sau reparaţii. |
- Aşezaţi un vas sub recipientul (2).
- Curăţaţi exteriorul recipientului. Demontaţi canistra cu o 1U-8760 cheie cu lanţ.
Show/hide table
IlustraĊ£ie 1 g03498157 Exemplu tipic - Lubrifiaţi garnitura inelară (1) de pe recipientul nou cu ulei de lubrifiere curat.
- Instalaţi recipientul nou. Înfiletaţi recipientul până când garnitura inelară intră în contact cu baza (3). Rotiţi recipientul cu ¾ dintr-o rotaţie completă.
- Îndepărtaţi recipientul. Eliminaţi vechea canistră şi orice ulei vărsat, în conformitate cu reglementările locale.
Caterpillar Information System:
C4.4 Industrial Engine Engine Air Cleaner Element (Dual Element/Canister Type) - Clean/Replace - If Equipped
C4.4 Industrial Engine Engine - Clean
C4.4 Industrial Engine Coolant Level - Check
Selective Catalytic Reduction Retrofit Aftertreatment General Information
2013/10/28 New Hardware is Available for Certain Retrofit Selective Catalytic Reduction (SCR) Hatch Openings {1091, 7273, 7553}
Jacket Water Heater Group Parts List For Certain 3500 Engines{1383} Jacket Water Heater Group Parts List For Certain 3500 Engines{1383}
SCR Retrofit Aftertreatment General Information
2013/11/04 A New Water Pump Seal is Used on Certain C18 Marine Engines Equipped with the Bronze Impeller Auxiliary Pump {1361}
2013/10/29 The Clamp Assembly for Muffler Has Been Improved On Certain C Series and D Series Excavators {1062}
XQC1600 Power Module Setup
C280-08 Marine Engine Exhaust Outlet Nitrogen Oxide Sensor - Replace
XQC1600 Power Module Fuel Related Components in Cold Weather
3500E Marine Engines Product Storage
C280-08 Marine Engine Alarms and Shutoffs
C280-08 Marine Engine Before Starting Engine
C280-08 Marine Engine Mounting and Dismounting
C280-08 Marine Engine Burn Prevention
C280-08 Marine Engine General Hazard Information
14L Motor Grader Air Cleaner - Remove and Install
2013/10/28 Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
C280-08 Tier 4 Engine Regulator (DEF Air) - Remove and Install
C280-08 Tier 4 Engine Solenoid Valve (DEF Air) - Remove and Install
2013/10/25 Machine Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
2013/11/04 New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}