CX31-P600 Petroleum Transmission Caterpillar

Transmission Hydraulic Control - Integral Pump Drive, No Retarder

Usage:

Show/hide table




图 1	g03479519
左视图

Show/hide table

表 1
技术规格 - 341-8430 变速箱液压控制总成和 341-8431 变速箱液压控制总成
项目	数量	零件	技术规格说明
1	1	196-1185 转速传感器总成	使用润滑剂稍微润滑即将密封的孔。拧紧至扭矩为 37 ± 4 N·m (27 ± 3 lb ft)。
2	1	214-2485 转速传感器总成	拧紧螺栓至 20 ± 5 N·m (15 ± 4 lb ft)。
3	8	8T-6912 螺栓	拧紧至扭矩为 28 ± 7 N·m (20.65168 ± 5.16292 lb ft)。
4	1	8T-4136 螺栓	拧紧至扭矩为 28 ± 7 N·m (20.65168 ± 5.16292 lb ft)。
5	3	8T-4189 螺栓	拧紧至扭矩为 28 ± 7 N·m (20.65168 ± 5.16292 lb ft)。
6	2	197-4652 安全阀	使用润滑剂稍微润滑即将密封的孔。
7	1	276-4166 流量控制阀组件	使用润滑剂稍微润滑即将密封的孔。拧紧至扭矩为 48 ± 3 N·m (35 ± 2 lb ft)。
8	1	353-5126 螺塞组件	拧紧至扭矩为 40 ± 6 N·m (30 ± 4 lb ft)。

Show/hide table




图 2	g03517339
后视图

Show/hide table

表 2
项目	数量	零件	技术规格说明
9	2	236-6222 转速传感器总成	拧紧螺栓至 20 ± 5 N·m (15 ± 4 lb ft)。
10	1	5W-8591 螺栓	拧紧至扭矩为 20 ± 5 N·m (15 ± 4 lb ft)。
11	2	234-5013 温度传感器总成	拧紧至扭矩为 20 ± 3 N·m (15 ± 2 lb ft)。

Show/hide table




图 3	g03479521
仰视图

Show/hide table

表 3
项目	数量	零件	技术规格说明
11	2	234-5013 温度传感器总成	拧紧至扭矩为 20 ± 3 N·m (15 ± 2 lb ft)。
12	12	8T-4908 螺栓	拧紧至扭矩为 30 ± 4 N·m (22 ± 3 lb ft)。
13	4	096-5866 螺栓	拧紧至扭矩为 30 ± 4 N·m (22 ± 3 lb ft)。
14	2	162-0177 螺塞组件	拧紧至扭矩为 45 ± 7 N·m (33 ± 5 lb ft)。
15	1	164-5567 快速断开连接器组件	拧紧至扭矩为 24 ± 3 N·m (18 ± 2 lb ft)。
16	12	285-9066 螺栓	拧紧至扭矩为 30 ± 4 N·m (22 ± 3 lb ft)。
17	1	183-3409 螺塞组件	拧紧至扭矩为 10 ± 2 N·m (89 ± 18 lb in)。

Caterpillar Information System:

C12.9 Marine Engines Coolant Level - Check

Certain C18 Marine Propulsion Engines Have Incorrect Overhaul (Top End) and Overhaul (Major) Intervals Published{1000} Certain C18 Marine Propulsion Engines Have Incorrect Overhaul (Top End) and Overhaul (Major) Intervals Published{1000}

C8.7 Marine Engine Before Starting Engine

2014/04/11 New Engine Software Is Now Used on Certain C15 and C18 Generator Engines {1901, 1920}

UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Capacitor - Replace

UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Maintenance Interval Schedule

CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Integral Pump Drive, Retarder

2013/12/05 A New Hose and Clamp for the Water Lines Group Are Used for Certain C15 and C18 Engines {1380}

CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Dropbox

2013/10/17 A New Oil Pan Group Is Available for C27 Industrial Engines Used in RH120 Shovels {1302}

390F Excavator Machine Systems Control Valve (Stick Lowering)

795F AC and 795F AC XQ Off-Highway Truck Hydraulic System and Brakes Oil Filter (Brake)

C15 and C18 Tier 4 Final Engines Engine Valve Lash - Inspect/Adjust

C12.9 Marine Engines Overhaul (Major)

C8.7 Marine Engine Fire Prevention and Explosion Prevention

C8.7 Marine Engine Sensors and Electrical Components

C32 Marine Generator Set Refill Capacities

C18 Marine Engine Refill Capacities

UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Hazard Information

C18 Generator Set Coolant - Change

C4.4 Industrial Engine Refill Capacities

C32 Marine Engine Maintenance Interval Schedule

C4.4 Industrial Engine Maintenance Interval Schedule

C4.4 Industrial Engine Fluid Recommendations - Engine Oil