System Identification
使用下述信息确定机器上的机具控制系统。
表 1 中描述了基于机具控制系统名称的部件配置。
Show/hide table
机具控制系统识别     | |||||
机具控制系统     | 工程术语     | 机器应用 (1)     | 控制装置     | 机具安全阀     | 可比 D-系列机具控制系统     |
组合功能 - 电子控制     | 机具 A0     | "多进程 - 电气"     | 电子控制 (2)     | 电气     | N/A     |
单向 - 双泵 - 电子控制     | 机具 A1     | "液压锤电气"     | 电子控制 (2)     | 机械     | N/A     |
中压     | 中压     | "前泵 - 电气"     | 电子控制 (2)     | 机械     | 中压     |
Show/hide table
( 1 ) | Monitor Setup Option(监视器设置选项) > "Service(维修)" > "Configurations(配置)" > "Aux Hyd Attachment(辅助液压附件)" > "Machine Application(机器应用)" |
( 2 ) | 带指轮的操纵手柄 |
系统标识符
该机具系统可根据机器上的部件数量和种类来识别。
组合功能 - 电子控制
配置有组合功能与电子控制的机器将具有下述部件:
- 位于动臂脚上方回转马达室中的两个可调安全阀。
- 位于主控制阀顶部的附件独立计量阀 (IMV)
- 位于主控制阀上的 ACS ECM 3
- 驾驶室中的电子控制装置
有关部件描述,请参考图 1、2 和 3。
Show/hide table
图 1 | g03587125 |
位于动臂座架上方的两个可变安全阀(典型示例) |
Show/hide table
图 2 | g03584745 |
附件 IMV 部分和附件 ECM 3 |
Show/hide table
图 3 | g03583340 |
驾驶室中的电子控制装置 (A) 带指轮的操纵手柄 (B) 左侧电动脚踏板 (C) 右侧电动脚踏板 |
单向/双泵 - 电子控制
配置有双泵单向流量且带电子控制的机器具有下述部件:
- 位于动臂脚上方回转马达室中的一个机械安全阀。
- 驾驶室中的电子控制装置
有关部件描述,请参考图 4 和图 5。
Show/hide table
图 4 | g03618842 |
位于动臂脚上方的机具安全阀 |
Show/hide table
图 5 | g03583249 |
驾驶室中的电子控制装置 (A) 带指轮的操纵手柄 (B) 左侧电动脚踏板 (C) 右侧电动脚踏板 |
中压液压系统
配置有中压系统的机器,仅见于带组合功能与电子控制的机器上,并且将具有下述部件:
- 位于回转马达室中的中压控制阀。
- 位于中压控制阀前部的两个比例减压阀。
- 驾驶室中的电子控制装置。
有关部件描述,请参阅图 6 和图 7。
Show/hide table
图 6 | g03587165 |
带比例减压阀控制的中压阀位于液压油箱附带的回转马达室中 |
Show/hide table
图 7 | g03584108 |
驾驶室中的电子控制装置 (A) 带指轮的操纵手柄 (B) 左侧电动脚踏板 |
Caterpillar Information System:
374F and 390F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
C175-16 Locomotive Engines Coolant Sample (Level 2) - Obtain
C175-16 Locomotive Engines Coolant Sample (Level 1) - Obtain
C175-16 Locomotive Engines Coolant Level - Check
C175-16 Locomotive Engines Coolant (ELC) - Change
CX31 and CX31 HT On-Highway Transmissions Serial Number Plate
C175-16 Locomotive Engines Coolant Extender (ELC) - Add
C9 Marine Engines and C9 Marine Generator Sets Air Starting Motor - Assemble
374F and 390F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Main Pump Flow Limit
C175-16 Locomotive Engines Coolant (DEAC) - Change
C175-16 Locomotive Engines Aftercooler Core - Inspect/Clean/Test
374F and 390F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Variable Relief Valves
794 AC Off-Highway Truck Hydraulic Tank Oil Level - Check - Brake, Steering, and Hoist Oil
C175-16 Locomotive Engines Engine Mounts - Inspect
C175-16 Locomotive Engines Engine Valve Lash - Check
349F and 352F Excavators Monitoring System
G3306B Gas Engines Radiator
Cat® Detect Object Detection Hardware Generation 4 for Small Off Highway Trucks, Motor Graders, Large Wheel Loaders, Large Wheel Dozers and Articulated Trucks Main Screen (with Fleet Onboard)
2014/03/07 Improved Alternator Mounting Groups Are Now Used on Certain C15 and C18 Engines {1154, 1405}
C9 Marine Engines and C9 Marine Generator Sets Air Starting Motor - Remove and Install
C175-16 Locomotive Engines Engine Crankcase Breather - Clean
2013/10/17 Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/29 Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain On-Highway Truck Engines {1250, 1251, 1290, 1713}
CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission) - Replace