Backup Alarm - Test
The backup alarm alerts the personnel behind the machine that the machine is backing up. The backup alarm is located at the rear of the machine.
- Park the machine on a level surface and stop the engine.
- Make sure that the area behind the machine is clear of personnel and clear of obstacles.
- Turn the engine start switch to the ON position.
Note: Do not start the engine.
- Turn the fan speed switch to the OFF position and turn off the entertainment radio (if equipped). Open a door or a window.
- Apply the service brakes.
- Move the shift control lever to the R position and listen for the backup alarm. The backup alarm should sound immediately. The backup alarm should continue to sound until the shift control lever is moved out of the R position.
- Move the shift control lever to the N position and release the service brake.
- If the backup alarm did not function, or if the backup alarm did not function properly, contact your Cat dealer.
Caterpillar Information System:
CX31-P600 Petroleum Transmission Transmission Oil - Change
CX31-P600 Petroleum Transmission Oil Filter (Transmission) - Replace
CX31-P600 Petroleum Transmission Oil Filter (Output Transfer Gears) - Replace
794 AC Off-Highway Truck Lowering the Body with Engine Stopped
CX31-P600 Petroleum Transmission Magnetic Screen (Output Transfer Gears) - Clean
2013/10/09 New Sensor Routing on Certain 3412 and 3412C Engines {1408, 7451}
CX31-P600 Petroleum Transmission Magnetic Screen (Transmission) - Clean - Standard
C4.4 Engines for Caterpillar Built Machines Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Engines for Caterpillar Built Machines Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
CX31-P600 Petroleum Transmission Breather (Transmission) - Clean
794 AC Off-Highway Truck Daily Inspection
CX31-P600 Petroleum Transmission Lifting and Tying Down the Transmission
C4.4 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal - Spheroidal Graphite Iron Crankshaft
374F and 390F Excavators Tool Control System General Information
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Window Wiper Delay - Test
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490} Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
374F and 390F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Variable Relief Valves
C175-16 Locomotive Engines Aftercooler Core - Inspect/Clean/Test
C175-16 Locomotive Engines Coolant (DEAC) - Change
374F and 390F Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Main Pump Flow Limit
C9 Marine Engines and C9 Marine Generator Sets Air Starting Motor - Assemble
C175-16 Locomotive Engines Coolant Extender (ELC) - Add
CX31 and CX31 HT On-Highway Transmissions Serial Number Plate
C175-16 Locomotive Engines Coolant (ELC) - Change