Flywheel - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 9S-9082 | Engine Turning Tool | 1 |
| B | 6V-2078 | Stud | 2 |
| C | 8T-3207 | Lifting Bracket | 1 |
- Remove two bolts (1).
Show/hide table
Illustration 2 g03404963 - Install Tooling (B).
- Remove remaining bolts (1) from flywheel (2).
- Move flywheel (2) away from the engine onto Tooling (B).
Show/hide table
Illustration 3 g03405061 Typical example - Attach Tooling (C) and a suitable lifting device to flywheel (2). The weight of flywheel (2) is approximately
172 kg (380 lb) . - Remove flywheel (2).
Show/hide table
Illustration 4 g03405030 - Remove ring gear (3) from flywheel (2).
Show/hide table
| |
| Illustration 1 | g03404939 |
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| B | 6V-2078 | Stud | 2 |
| C | 8T-3207 | Lifting Bracket | 1 |
- Install flywheel in the reverse order of removal.
- Lubricate bolts (1) with engine oil and tighten to a torque of
1150 ± 60 N·m (848 ± 44 lb ft) .
- Lubricate bolts (1) with engine oil and tighten to a torque of
Caterpillar Information System:
C7.1 Marine Generator Set Emissions Certification Film
Installation of the 444-6457 Fastener Kit on the Pre-Lubrication Oil Pump Group for Certain G3500 and G3600 Engines{1319, 7553} Installation of the 444-6457 Fastener Kit on the Pre-Lubrication Oil Pump Group for Certain G3500 and G3600 Engines{1319, 7553}
C4.4 Industrial Engine Plate Locations and Film Locations
C7.1 Marine Generator Set Aftercooler Core - Inspect
2013/08/15 A New Water Lines Group Is Used on G3508B Petroleum Engines {1355, 1380, 1393}
2013/11/21 A New Fastener Kit Is Used on the Pre-Lubrication Oil Pump Group of Certain G3500 and G3600 Engines {1319, 7553}
C7.1 Industrial Engine Manifold (Diesel Exhaust Fluid)
C7.1 Industrial Engine Diesel Exhaust Fluid Pump
C4.4 Industrial Engine Product Description
C7.1 Industrial Engine Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Electronic Control (Diesel Exhaust Fluid)
3500B and 3500 Marine Propulsion Engines with EUI Option Maintenance Interval Schedule
C4.4 Industrial Engine Product Lifting
2013/07/11 Apply Primer to the Air Cleaner Brackets Prior to Installation on Certain 3512CEngines {1051}
2013/07/11 A New Band Clamp Is Used on the Exhaust Elbow Groups of Certain 3500C Engines {1061}
3516C Petroleum Engines Camshaft - Remove and Install
C175 Generator Set Engines Electric Starting Motor - Remove and Install
C32 Generator Set Product Installation
C175 Generator Set Engines Air Starting Motor - Remove and Install
434-4988 Major Engine Overhaul Foundational Kit for 3406B and 3406C Marine Engines{1000} 434-4988 Major Engine Overhaul Foundational Kit for 3406B and 3406C Marine Engines{1000}
2013/07/25 New Software is Used on Certain 3516C and 3516C HD Generator Set Engines {1920}
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps System Pressure - Release
New Connecting Rod Bolts Are Available for C175 Engines{1218, 7553} New Connecting Rod Bolts Are Available for C175 Engines{1218, 7553}
3500B Marine Propulsion Engines Maintenance Interval Schedule