Turbocharger Mounting
Show/hide table
Illustration 1 | g03387216 |
Show/hide table
Specification for 243-6449 Turbocharger Mounting Gp | |||
Item | Qty | part | Specification Description |
D | 4 | 6V-3535 Dowel | After installation, protrusion of the dowel is |
E | 4 | 137-0135 Dowel | After installation, protrusion of the dowel is |
F | 12 | 3B-0623 Cup Plug | Before assembly, apply High strength or High Temperature Anaerobic Flange sealant to the bores. |
Installation depth is |
Caterpillar Information System:
2013/07/08 A New Damper Group is Used on Certain G3520 Engines {1205}
374F Excavator Hydraulic System Final Drive
C13 Industrial Engine Clean Emissions Module - Remove and Install
C175-16 Locomotive Engine Control Panel (Engine)
C175-16 Locomotive Engine Cover Group (Front Housing)
C175-16 Locomotive Engine Fumes Disposal Filter
C32 Generator Set Stator Winding Temperature - Test
C175-16 Locomotive Engine Engine Coolant Pressure Sensor
C175-16 Locomotive Engine Air Cleaner
C13 Engine for Caterpillar Built Machines Voltage Control (Load Protection) - Remove and Install
C13 Engine for Caterpillar Built Machines Manifold (DEF Heater) - Remove and Install
C13 Engine for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
2013/07/01 New Turbocharger Cooling Lines Are Available for Certain 3512C Petroleum Drilling Engines {1052, 1380}
374F Excavator Hydraulic System Control Valve (Straight Travel)
3516C Petroleum Engines Aftercooler - Remove and Install
C32 Marine Engine Engine Air Cleaner Element (Single Element) - Replace
3512E Engines Turbocharger - Remove and Install
2013/05/28 New Water Ferrules Are Available for 3500 Engine Cylinder Heads {1124, 7555}
3512E Engines Fuel Priming Pump - Remove and Install
3512E Engines Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Cover Group (Front Housing)
C175-16 Locomotive Engine Water Lines
C175-16 Locomotive Engine Water Lines
C175-16 Locomotive Engine Accessory Drive