Service Tools
The following service tools should be used in order to aid in troubleshooting the electrical system.
Show/hide table
| Service Tools | |
|---|---|
| Part No. | Description |
| 237-5130 | Digital Multimeter Gp |
| 257-9140 | Digital Multimeter |
| 8T-3224 | Needle Tip |
| 8T-8726 | Adapter Cable As |
| 7X-1710 | Multimeter Probe |
| 371-3480 | Cable(1) |
| 445-1527 | Wiring Harness |
| 317-7484 | Cat Comm Adapter III |
| 175-3700 | Connector Repair Kit |
| 190-8900 | Connector Repair Kit |
Show/hide table
| (1) | USB Cable Type A Male/Type A Male |
Use the 237-5130 Digital Multimeter Gp or 257-9140 Digital Multimeter in order to check continuity or measure voltage.
The 7X-1710 Multimeter Probe can be used in order to measure the voltage at the connectors without disconnecting the connectors. The probe cables are pushed into the back of the connector along the wire. The 8T-8726 Adapter Cable As has a 3-pin breakout. The adapter cable is used for measurements in the sensor circuits.
Note: Using continuity testers such as the 8T-0500 Continuity Tester or voltage testers such as the 5P-7277 Voltage Tester is not recommended.
Caterpillar Information System:
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Pump (Stainless Steel) - Remove and Install
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Pump (Stainless Steel) - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Pump (Stainless Steel) - Assemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Cannon - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Cannon - Assemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Nozzle - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Nozzle - Assemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Control Manifold (Pilot Oil) - Disassemble
Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606} Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606}
2014/10/10 Engine News Article List for <B>S/N:</B>8LL Engines {1000}
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
2013/08/30 A New Adapter Is Used on Certain 3512C Petroleum Engines {1157}
C32 Generator Set Plate Locations and Film Locations
Customer Assembly Requirements for C7.1, C4.4, and C3.4B Engines {1000, 108D} Customer Assembly Requirements for C7.1, C4.4, and C3.4B Engines {1000, 108D}
C32 Generator Set Sound Information
2013/06/13 Improved 3412 Marine Bundled Repair Solution Foundational Kits Are Available {1000}
C3.4B Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove - Wall Flow Diesel Particulate Filter
Caterpillar Off-Highway Truck (777, 785, 789, 793, and 797) Torque Converter Removal and Installation Technician Checklist {0372, 0374, 3101, 3101} Caterpillar Off-Highway Truck (777, 785, 789, 793, and 797) Torque Converter Removal and Installation Technician Checklist {0372, 0374, 3101, 3101}
C3.4B Engines for Caterpillar Built Machines Diesel Particulate Filter - Install - Through Flow Diesel Particulate Filter
C32 Generator Set Reference Material
C3.4B Engines for Caterpillar Built Machines Diesel Particulate Filter - Install - Wall Flow Diesel Particulate Filter
C3.4B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C3.4B Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C3.4B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install