Oil Filter (Transmission)
Show/hide table
Illustration 1 | g03382323 |
Show/hide table
376-0994 Oil Filter and Mounting Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 183-7264 Fluid Sampling Valve As | Torque to |
2 | 1 | 164-5567 Quick Disconnect Coupler As | Torque to |
3 | 1 | 349-6097 Pressure Switch | Torque to |
4 | 1 | - | Before assembly, lubricate the O-ring seal and the threads of the filter housing group (5) lightly with the lubricant that is being sealed. |
5 | 1 | 432-2658 Filter Housing Gp | Torque to |
Do not use an air wrench to install filter housing group . |
Caterpillar Information System:
C0.5 and C0.7 Industrial Engines Starting with Jump Start Cables
C3.4B Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
120 Motor Graders Magnetic Switch (Secondary Steering Relay)
C0.5 and C0.7 Industrial Engines Self-Diagnostics
LC5000, LC6100, and LC7000 Electric Power Generation Exciter Stator - Remove and Install
G3516 TA Engine Unburned Gas - Purge
G3512 Generator Set Engines Generator Output Power Sensor - Set
LC5000, LC6100, and LC7000 Electric Power Generation Terminal Box - Remove and Install
3512C Petroleum Engines with Dynamic Gas Blending Sensor Signal (Analog, Active) - Test
C280-16 Engine Aftercooler - Install
2013/05/23 A New Pressure Sensor Is Used for Certain C175-16 Commercial Engines {1439, 1919, 7400}
2013/05/17 New Advisor Software for Certain G3520B Engines Equipped With Engine Temperature Modules {1901, 1920}
3512C Petroleum Engines with Dynamic Gas Blending Electrical Connectors
Installation of Cold Climate Kit for C4.4 Engine {1317, 1408} Installation of Cold Climate Kit for C4.4 Engine {1317, 1408}
C0.5 and C0.7 Industrial Engines Engine Operation
3512C Petroleum Engines with Dynamic Gas Blending Exhaust Temperature - Test
3512C Petroleum Engines with Dynamic Gas Blending Exhaust Temperature Is High
3512C Petroleum Engines with Dynamic Gas Blending Emergency Stop - Test
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057} 4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
3512C Petroleum Engines with Dynamic Gas Blending Sensor Supply - Test
LC5000, LC6100, and LC7000 Electric Power Generation Bearing - Remove and Install
LC5000, LC6100, and LC7000 Electric Power Generation Diode Assembly - Remove and Install
LC5000, LC6100, and LC7000 Electric Power Generation Generator - Install
LC5000, LC6100, and LC7000 Electric Power Generation Generator - Remove