C0.5 and C0.7 Industrial Engines Caterpillar


Self-Diagnostics

Usage:

C0.5 C62
The electronic engines can perform a self-diagnostics test. When the system detects an active problem, a diagnostic lamp is activated. This lamp is a multi function lamp that is located on the electronic control module. The lamp will flash a code that will give am indication of the fault. For more information on the flash codes, refer to this Operation and Maintenance Manual, "Diagnostic Flash Code Retrieval".

Caterpillar Information System:

LC5000, LC6100, and LC7000 Electric Power Generation Exciter Stator - Remove and Install
G3516 TA Engine Unburned Gas - Purge
G3512 Generator Set Engines Generator Output Power Sensor - Set
LC5000, LC6100, and LC7000 Electric Power Generation Terminal Box - Remove and Install
3512C Petroleum Engines with Dynamic Gas Blending Sensor Signal (Analog, Active) - Test
C280-16 Engine Aftercooler - Install
2013/05/23 A New Pressure Sensor Is Used for Certain C175-16 Commercial Engines {1439, 1919, 7400}
2013/05/17 New Advisor Software for Certain G3520B Engines Equipped With Engine Temperature Modules {1901, 1920}
3512C Petroleum Engines with Dynamic Gas Blending Sensor Signal (PWM) - Test
2013/09/27 New Turbochargers and Accessories Are Now Used on Certain High Horsepower C13 Truck Engines {1052, 1053}
2013/08/21 New Wiring Harnesses Are Available for Certain G3500B Engines {1408}
3512C Petroleum Engines with Dynamic Gas Blending Speed Control - Test
120 Motor Graders Magnetic Switch (Secondary Steering Relay)
C3.4B Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
C0.5 and C0.7 Industrial Engines Starting with Jump Start Cables
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Oil Filter (Transmission)
3512C Petroleum Engines with Dynamic Gas Blending Electrical Connectors
Installation of Cold Climate Kit for C4.4 Engine {1317, 1408} Installation of Cold Climate Kit for C4.4 Engine {1317, 1408}
C0.5 and C0.7 Industrial Engines Engine Operation
3512C Petroleum Engines with Dynamic Gas Blending Exhaust Temperature - Test
3512C Petroleum Engines with Dynamic Gas Blending Exhaust Temperature Is High
3512C Petroleum Engines with Dynamic Gas Blending Emergency Stop - Test
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057} 4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
3512C Petroleum Engines with Dynamic Gas Blending Sensor Supply - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.