C13 Tier 4 Final Engines Caterpillar


Valve Actuator

Usage:

730C2 2T4


Illustration 1g03368533

Table 1
Specification for 324-2513 Valve Actuator Gp 
Item  Qty  Part  Specification Description 
Use the following sequence for installing and adjusting the CAT brake:

1. Loosen the jam nut (1) until the lash adjustment screw can be rotated easily.
2. Insert the feeler gauge between the exhaust rocker arm and the CAT brake pin.
3. Turn the lash adjustment screw clockwise until there is a slight drag on the feeler gauge when pulled.
4. Set the lash to 0.7112 ± 0.0500 mm (0.02800 ± 0.00197 inch).
5. Hold the lash adjustment screw in place and tighten the jam nut to 15 ± 3 N·m (133 ± 27 lb in).
6. Recheck the CAT brake lash settings. 

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.