3500 Engines Caterpillar


Engine Oil Pan

Usage:

3516C GBZ


Illustration 1g06336335

Table 1
Item  Qty  Part  Specification Description 
5P-5700 O-Ring Seal  Before assembly, lubricate the bore lightly with the lubricant that is being sealed. 
30  5P-5855 Bolt  After assembly, as required apply green Loctite 290 to the open top end of the bolt holes of the oil pan. 
6V-4315 O-Ring Seal  Before assembly, lubricate the bore lightly with the lubricant that is being sealed. 
10  1A-2029 Bolt  Use the following procedure to tighten the bolts:
1. First tighten the bolts (5) to standard torque.
2. Tighten the bolts (4) in a numerical sequence 1 to 10 as shown in Illustration 1 to a standard torque. 
3P-0654 O-Ring Seal  Before assembly, lubricate the bore lightly with the lubricant that is being sealed. 
Before assembly, apply red Loctite 596 to both sides of the gasket joints. 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.