3500B Generator Set Engines Caterpillar


Air Lines

Usage:

3516B JCH



Illustration 1g03367470

Table 1
Specification for 434-4226 Air Lines Gp    
Item     Qty     Part     Specification description    
1     16     6V-3917 O-Ring Seal     Lubricate the bore lightly with 5P-3975 Rubber Lubricant.    
2     3     5P-8940 O-Ring Seal     Lubricate the bore lightly with 5P-3975 Rubber Lubricant.    
3     16     6V-5101 O-Ring Seal     Lubricate the bore lightly with 5P-3975 Rubber Lubricant.    



Illustration 2g03367471

Bolt tightening sequence

Table 2
Item     Qty     Part     Specification description    
4     12     9F-2773 Bolt     Use the following procedure in order to assemble the aftercooler assembly and tighten the bolts:

1. Assemble the seals to the aftercooler core.
2. Temporarily secure the bottom seal to the aftercooler with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal.
3. Assemble the aftercooler with seals to the inlet manifold.
4. Inspect the bottom seal in order to ensure that the seal is seating correctly in the recess.
5. Install the aftercooler cover.
6. Inspect the upper seal in order to ensure that the seal is seating correctly in the recess.
7. Install the cover bolts. Hand tighten the cover bolts.
8. Tighten the bolts in a numerical sequence to
24 N·m (18 lb ft) as shown in Illustration 2.
9. Again, tighten the bolts in a numerical sequence to
47 N·m (35 lb ft) that is shown in Illustration 2.
10. Remove the tape.    

Caterpillar Information System:

C32 Generator Set Safety Messages
C9.3 Tier 4 Final Engines Flywheel
C13, C15, and C18 Tier 4 Final Engines Radiator
3500B Generator Set Engines Air Lines
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Transmission to Output Transfer Gears - Connect
C6.6 Generator Sets Product Description
C280-16 Engine Engine Performance - Test
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Transmission from Output Transfer Gears - Separate
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
3500 Generator Set Engines Flywheel Housing Cover
C13, C15, and C18 Tier 4 Final Engines Radiator
3500B Generator Set Engines Water Temperature Regulator - Aftercooler
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Coolant Temperature Is Low
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Coolant Temperature Is High
2013/05/03 New Parts Are Available for the Air Cleaner Group for 3512C and 3516C Marine Engines {1051, 1054}
C13, C15, and C18 Tier 4 Final Engines Radiator
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Engine Overspeeds
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Fuel Filter Is Restricted
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.