C15 and C18 Industrial Engines Caterpillar


Flywheel Housing

Usage:

C15 LDN



图 1g03366901



图 2g03366903

螺栓拧紧顺序

表 1
354-0782 飞轮壳总成 的技术规格    
项目     数量     零件     技术规格说明    
在安装飞轮壳之前,检查飞轮壳的前端面和缸体的后端面。 这些部件必须没有以下物质:机油、燃油、水、密封垫粘合剂、组装固定胶和任何其他异物。    
要密封飞轮壳体与缸体之间的接合处,向飞轮壳体的配合面上涂覆超蓝 Loctite 587。    
1     8     0S-1591 螺栓     按照以下步骤拧紧飞轮壳螺栓:

1. 按照图 2 中所示的数字顺序,将螺栓 1 至螺栓 24 拧紧至扭矩为
()(40 ± 10 N·m)(30 ± 7 lb ft)。
2. 按照图 2 中所示的数字顺序,再次将螺栓 1 至螺栓 9 拧紧至扭矩为
135 ± 20 N·m (100 ± 15 lb ft)。
3. 再次按照图 2 中所示的数字顺序将螺栓 10 至 24 拧紧至扭矩为
55 ± 10 N·m (41 ± 7 lb ft)。    
2     2     0T-0573 螺栓    
3     9     5J-5793 螺栓    
4     5     0S-1571 螺栓    
5     1     5F-0304 螺塞     拧紧至扭矩为
55 ± 14 N·m (41 ± 10 lb ft)。    

Caterpillar Information System:

3500 Engines Duplex Engine Oil Filters
C15 and C18 Industrial Engines Flywheel Housing
C3.3B and C3.8 Engines for Caterpillar Built Machines Diagnostic Trouble Codes
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Remove and Install
C32 Marine Generator Set Fumes Disposal Filter Service Indicator - Check
C32 Marine Generator Set Fumes Disposal Filter Element - Replace
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Pinion Shaft - Remove and Install
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Gear (Bull) - Remove and Install
C32 Marine Generator Set Maintenance Interval Schedule
374F Excavator System Pressure Release
C11 and C13 Engines Engine Oil Filter Base
3500 Engines Air Lines
3500B Generator Set Engines Radiator
C15 and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Flush
Retrofitting the Dynamic Gas Blending Capability for Certain 3512B Off-Highway Truck Engines {1000, 1250, 7000} Retrofitting the Dynamic Gas Blending Capability for Certain 3512B Off-Highway Truck Engines {1000, 1250, 7000}
TA2 Technical Inspection for 3516B Dynamic Gas Blending Genset Engines{1000} TA2 Technical Inspection for 3516B Dynamic Gas Blending Genset Engines{1000}
3500B Generator Set Engines Turbocharger Oil Lines
2013/09/27 Replacement of the Variable Valve Actuator Assembly at Overhaul Is Recommended on Certain On-Highway Truck Engines {1130}
3500B Generator Set Engines Air Lines
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C18 Industrial Engine Air Inlet and Exhaust System
2013/04/10 Recommendations for Checking the Alignment of Soft Mounted 3500 Generator Sets {1152, 1801, 4471}
C7.1 Generator Sets Additional Messages
C6.6 Generator Sets Model View Illustrations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.