C3.3B Tier 4 Final Engines for Caterpillar Built Machines Caterpillar


Fuel Injector

Usage:

236D BGZ


Illustration 1g02914362
(1) Fuel Injector Terminal Nuts


Illustration 2g03360403
(2) Fuel injector clamp nut


Illustration 3g03360406
(3) Overflow pipe (Common Rail)

Table 1
Tightening torque  Injector terminal nuts
(1) 
1.6 to 2.2 N·m (1.2 to 1.6 lb ft) 
Tightening torque  Fuel injector clamp nut
(2) 
24 to 27 N·m (18 to 20 lb ft) 
Tightening torque  Overflow pipe (Common Rail)
(3) 
9.8 to 11.2 N·m (87 to 99 lb in) 

Note: When replacing any of these components, ensure that you replace any metal gaskets as well.

Caterpillar Information System:

C7.1 Engines Inlet Manifold - Remove and Install
C7.1 Engines Inlet and Exhaust Valves - Remove and Install
C7.1 Engines Inlet and Exhaust Valve Springs - Remove and Install
C7.1 Engines Inlet Air Temperature Sensor - Remove and Install
C7.1 Engines Idler Pulley - Remove and Install - Grooved Idler Pulley
C7.1 Engines Idler Pulley - Remove and Install - Flat Idler Pulley
C7.1 Engines Idler Gear - Remove
C7.1 Engines Idler Gear - Install
C7.1 Engines Housing (Front) - Remove
C7.1 Engines Housing (Front) - Remove - Heavy Duty Housing (Front)
C7.1 Engines Housing (Front) - Install
C7.1 Engines Housing (Front) - Install - Heavy Duty Housing (Front)
C7.1 Engines Lifter Group - Remove and Install
C7.1 Engines Piston Cooling Jets - Remove and Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System Fuse (Input/Output Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan Transformer
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Isolation Switches
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan (Input/Output Cabinet)
C7.1 Engines Pistons and Connecting Rods - Assemble
C7.1 Engines Pistons and Connecting Rods - Disassemble
C7.1 Engines Pistons and Connecting Rods - Install
C7.1 Engines Pistons and Connecting Rods - Remove
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies External Source Sync Relay and Terminal Block
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Gen Set Module Circuit Breaker (Input/Output Cabinet)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.