C280-16 Generator Set Engine for Nuclear Applications Caterpillar


Component Location

Usage:

C280-16 ENS

Locations of the Components for the ECM Enclosure




Illustration 1g03353978

(1) MCOR #1 relay

(2) MCOR #2 relay

(3) Global CAN (#2 termination resistor) Secondary ECM

(4) Local CAN (#2 termination resistor) Secondary ECM

(5) Jumper connection (ground)

(6) Control assembly (diode box)

(7) Global CAN (#1 termination resistor) Primary ECM

(8) Power mode relay

(9) Local CAN (#1 termination resistor) Primary ECM

(10) Keyswitch relay (to secondary ECM)

(11) Keyswitch relay (to primary ECM)

(12) Rail connector (right side)

(13) Thermocouple harness connector

(14) LCPD box connector

(15) Engine harness connector

(16) LCPD box connector

(17) Engine Interface connector

(18) Service tool connector

(19) Primary ECM J1

(20) Primary ECM

(21) Primary ECM J2

(22) Secondary ECM J1

(23) Secondary ECM

(24) Secondary ECM J2

(25) Connectors for future load share option

(26) Exhaust temperature module (pyrometer)

(27) Atmospheric pressure sensor (to secondary ECM)

(28) Atmospheric pressure sensor

(29) Thermocouple harness connector

(30) Rail connector (left side)

Locations of the Components for Front Mounted Turbocharger Applications




Illustration 2g03353980

Engine view (front)

(1) Turbocharger turbine speed sensor connectors

(2) Oil (filter inlet) pressure sensor

(3) Oil (filter inlet) temperature sensor

(4) Oil (block inlet) pressure sensor

(5) Oil (block inlet) pressure sensor (to secondary ECM)

(6) Coolant (block inlet) pressure sensor

(7) Coolant (block inlet) pressure sensor (to secondary ECM)

(8) AC/OC (pump outlet) temperature sensor

(9) AC/OC (pump outlet) pressure sensor

(10) Pre-lubrication pump




Illustration 3g03353982

Engine view (rear)

(11) Fuel (filter outlet) pressure sensor

(12) Fuel (filter inlet) pressure sensor

(13) Fuel (filter outlet) pressure sensor (to secondary ECM)

(14) Air shutoff status switch connector

(15) Air shutoff valve (solenoid)

(16) Timing sensor (camshaft)

(17) Timing sensor (crankshaft)




Illustration 4g03353986

Engine view (right side)

(18) Air (intake manifold) temperature sensor connector

(19) Air (intake manifold) temperature sensor connector (to secondary ECM)

(20) Coolant (block outlet) temperature sensor connector (to secondary ECM)

(21) Air (Intake manifold) pressure sensor connector

(22) Waist gate solenoid connector

(23) Air (Intake manifold) pressure sensor connector (to secondary ECM)

(24) Oil (filter inlet) temperature sensor

(25) Oil (filter inlet) pressure sensor

(26) Barring device switch connector

(27) ECM enclosure

(28) Low Current Power Distribution (LCPD) box

(29) Crankcase pressure (right side) sensor




Illustration 5g03353983

Engine view (left side)

(30) Coolant (block outlet) temperature sensor connector (to secondary ECM)

(31) Prelube satisfied continuous sensor connector

(32) Starting motor valve (solenoid) connector

(33) Intermittent prelube valve (solenoid) connector

Caterpillar Information System:

C3.3B Tier 4 Final Engines for Caterpillar Built Machines Coolant Temperature Sensor
436-1747 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 436-1747 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
C1.5 and C2.2 Industrial Engines ARD Ignition - Test
436-1745 Major Engine Overhaul Foundational Kit for 3412E Marine Engines{1000} 436-1745 Major Engine Overhaul Foundational Kit for 3412E Marine Engines{1000}
374F Excavator Hydraulic System Solenoid Valve (Hydraulic Lockout)
2013/03/27 A New Special Instruction Is Now Available For Installing a Relay and Updating the Digital Control Unit (DCU) for Certain Cat® Engines {7451, 7490}
C9.3 Industrial Engine Battery Disconnect Switch - If Equipped
G3516H and G3520H Generator Set Engines Cylinder Head Valves
2013/03/08 Turbochargers on Certain 3054C, 3054E, C4.4, and C4.4 (Mech) Engines {1052, 1053}
G3516H and G3520H Generator Set Engines Cover Group (Front Housing)
G3516H and G3520H Generator Set Engines Cylinder Head
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620} Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
Installation of Coolant Lines for the Throttle Actuator on CG137 Engines{1265, 1266} Installation of Coolant Lines for the Throttle Actuator on CG137 Engines{1265, 1266}
UPS 750 Uninterruptible Power Supply Model View Illustrations
2013/03/08 New Water Temperature Regulators Are Available for 3600, G3600, and C280 Engines {1355, 1393}
C9.3 Industrial Engine Manual Stop Procedure
C13 Industrial Engines Product Lifting
G3516H and G3520H Generator Set Engines Ignition Transformer
C1.5 and C2.2 Industrial Engines Engine Pressure Sensor Open or Short Circuit - Test
C1.5 and C2.2 Industrial Engines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
2014/05/20 New Camshafts Are Used for Certain C27 and C32 Commercial Engines {1210}
2013/03/13 A New Bracket and Related Components, for the Exhaust Manifold Group, Are Used on Certain C27 Industrial Engines {1059}
UPS 750 Uninterruptible Power Supply System Description
C9 Engine Belts - Inspect/Adjust/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.