C3.3B Engines for Caterpillar Built Machines Caterpillar


Inlet Manifold - Remove and Install

Usage:

236D BGZ

拆卸步骤

开始:

  1. 拆下燃油歧管。

  2. 拆下废气再循环阀。

注: 请参阅技术规格 UENR3421 "发动机设计",了解非指定的发动机扭矩值。



    图 1g03339493

  1. 断开软管组件 (1) 并重新定位。

  2. 拆下螺栓 (2) 和管组件 (3)。

  3. 拆下螺栓 (4) 以拆下进气歧管 (5) 和密封垫。

安装步骤

  1. 按照与拆卸相反的顺序安装进气歧管 (5)。

Caterpillar Information System:

C3.3B Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
2013/02/06 Different Water Temperature Regulators (Thermostats) are Available for G3600 Engines {1355}
C3.3B Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
C175-16 Marine Propulsion Engines Engine Shutdown Occurrence
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280} 398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
2013/01/21 Software Update For Proper Air Fuel Ratio Controller Operation Of Certain G3408 and G3412 Engines {1901, 1920}
2013/01/21 New Fuel Pressure Regulator and Set Screw Are Used for 3600 and C280 Engines {1252, 1254}
C9.3 Industrial Engine Fumes Disposal Filter Element - Replace - Emission Related Component
C3.3B Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C32 Marine Generator Set Safety Messages
C32 Marine Generator Set Model View Illustrations
3516C Locomotive Engine and Generator Set Maintenance Interval Schedule
2013/01/29 Improved Software is Now Used for Petroleum Fracturing Transmissions {7620}
2013/03/01 New Suction Screen and Handle Are Used in 3500 Locomotive Engines {1302, 1302}
Work Area Vision System Maintenance Interval Schedule
C1.5 and C2.2 Industrial Engines ECM Auxiliary Output - Test
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Electronic Control System Operation
2013/04/25 A New Hose and Tube Assembly, and Related Components Is Used on Certain C32 Marine Engines {1274}
Cat® Detect Object Detection System Event Codes
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Detonation Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.