Different Water Temperature Regulators (Thermostats) are Available for G3600 Engines {1355}
- Engine:
- All G3600
Description of Change: The thermostat opening is slower than the previous thermostat. The valve opens slower to reduce oscillation of the water temperature. Reducing the oscillation of the temperature helps stabilize emission swings.
Adaptable To:
Show/hide table
Illustration 1 | g03340466 |
(1) 367-7900428-6168 Water Temperature Regulator |
The thermostat part numbers and the previous thermostat part numbers are listed in table 1.
Show/hide table
Thermostat Part Numbers     | Previous Thermostat Part Numbers     |
---|---|
428-6168 Water Temperature Regulator     | 247-7133 Water Temperature Regulator     |
367-7900 Water Temperature Regulator     | 248-5513 Water Temperature Regulator     |
Show/hide table
Effective Engine Serial Numbers     | |
---|---|
G3606     | S/N:3XF00375-UP S/N:4ZS01706-UP     |
G3608     | S/N:4WF00249-UP S/N:BEN00789-UP     |
G3612     | S/N:1YG00261-UP S/N:BKE00638-UP     |
G3616     | S/N:4CG00248-UP S/N:BLB00817-UP     |
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
C175-16 Marine Propulsion Engines Engine Shutdown Occurrence
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280} 398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
2013/01/21 Software Update For Proper Air Fuel Ratio Controller Operation Of Certain G3408 and G3412 Engines {1901, 1920}
2013/01/21 New Fuel Pressure Regulator and Set Screw Are Used for 3600 and C280 Engines {1252, 1254}
C9.3 Industrial Engine Fumes Disposal Filter Element - Replace - Emission Related Component
C3.3B Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
C32 Marine Generator Set Control Panel - Marine Generator Set Engine Control Panel 3 (MGECP 3)
Air Shutoff Test and Inspection for Certain C7 and C9 Petroleum Engines{1078} Air Shutoff Test and Inspection for Certain C7 and C9 Petroleum Engines{1078}
C3.3B Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
C3.3B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C32 Marine Generator Set Safety Messages
C32 Marine Generator Set Model View Illustrations
3516C Locomotive Engine and Generator Set Maintenance Interval Schedule
2013/01/29 Improved Software is Now Used for Petroleum Fracturing Transmissions {7620}
2013/03/01 New Suction Screen and Handle Are Used in 3500 Locomotive Engines {1302, 1302}
Work Area Vision System Maintenance Interval Schedule
C1.5 and C2.2 Industrial Engines ECM Auxiliary Output - Test
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Electronic Control System Operation
2013/04/25 A New Hose and Tube Assembly, and Related Components Is Used on Certain C32 Marine Engines {1274}