C1.5 and C2.2 Industrial Engines Caterpillar


Belts - Inspect/Replace - Air Pump belt

Usage:

C1.5 G9N


The air pump belt must be replaced at 1000 hours. Refer to Disassembly and Assembly, "Belt (Air Pump) - Remove and Install" for more information.

Belt Tension Frequency

The belt for the air pump must be checked with a suitable belt tensioner meter. The meter checks the vibration frequency of the belt in order to determine the belt tension.

Refer to table 1 for three cylinder engines. Refer to table 2 for four cylinder engines.

Table 1
3 Cylinder Engines    
High Mounted Air Pump     Low Mounted Air Pump     Frequency Range for a New Belt     Frequency Range for a Used Belt    
X     -     85-90 Hz     70-75 Hz    
-     X     175-180 Hz     147-152 Hz    

Table 2
4 Cylinder Engines    
High Mounted Air Pump     Low Mounted Air Pump     Frequency Range for a New Belt     Frequency Range for a Used Belt    
X     -     77-82 Hz     65-70 Hz    
-     X     175-180 Hz     147-152 Hz    

Caterpillar Information System:

C32 Marine Engine Coolant Temperature Is High
3508B, 3512B, and 3516B High Displacement Generator Sets Fuel Filter Differential Pressure - Check
C175-16 Engine Coolant Temperature Control Module - Test
C1.5 and C2.2 Industrial Engines Belts - Inspect/Adjust/Replace - Air Pump Belt
3508B, 3512B, and 3516B High Displacement Generator Sets Engine Valve Lash - Check
2012/10/26 New Software Is Used for a 3512C Petroleum Engine {1901, 1920}
C1.5 and C2.2 Industrial Engines Alternator and Fan Belts - Replace
C175-16 Engine Configuration Parameters
C32 Marine Engine Coolant Level Is Low
C32 Marine Engine Alternator Problem - Charging Problem and/or Noisy Operation
C175-16 Generator Set Engine Inlet and Exhaust Valves - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Engine Mounts - Inspect
Procedure for Machine Dimension Measure-Up for Mining Sites with Cat® Command For Hauling {7605, 79AU} Procedure for Machine Dimension Measure-Up for Mining Sites with Cat® Command For Hauling {7605, 79AU}
C32 Marine Engine Cylinder Is Noisy
C32 Marine Engine ECM Does Not Communicate with Other Modules
C32 Marine Engine Engine Cranks but Does Not Start
3512B and 3512C Petroleum Generator Set Engines Air Shutoff - Test
C175-16 Engine Diagnostic Trouble Codes
3508B, 3512B, and 3516B High Displacement Generator Sets Refill Capacities
3508B, 3512B, and 3516B High Displacement Generator Sets Fluid Recommendations
C32 Marine Engine Engine Has Mechanical Noise (Knock)
C32 Marine Engine Engine Misfires, Runs Rough or Is Unstable
C13, C15, and C18 Tier 4 Final Engines DEF Temperature Is Low
2012/11/01 Medium Pressure Circuit Control Valves have been Improved for Certain Excavators and Mobile Hydraulic Power Units {5051}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.