Engine Oil Pan - Disassemble
Start By:
- Remove the engine oil screen. Refer to Disassembly and Assembly, "Engine Oil Screen - Remove and Install".
- Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove".
- Remove bolts (1) and bolts (3). Remove elbow (2) and tube (4).
Show/hide table
Illustration 2 g03285342 - Remove bolts (5), bolts (6), and bolts (8). Remove engine oil screen housing (7).
Show/hide table
| |
| Illustration 1 | g03281739 |
Caterpillar Information System:
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Sensor Signal (PWM) - Test
C175-16 Engine Fuel Priming Pump - Test
3512C SR4B Generator Sets Maintenance Interval Schedule - Standby
3512C SR4B Generator Sets Maintenance Interval Schedule - Prime
2015/02/27 A New Design of Jacket Water Heater Is Now Used on Certain C4.4 and C3.3 Generator Sets {1333, 1383}
Alternator - Bosch K1/N1 Alternator Is Noisy
Alternator - Bosch K1/N1 Alternator Charge Rate Is High
Alternator - Bosch K1/N1 Alternator Charge Rate Is Low
Alternator - Bosch K1/N1 Alternator Will Not Charge
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Exhaust Temperature Is High
3512B and 3512C Petroleum Generator Set Engines Engine Overspeeds
2012/10/18 Improved EMCP4 Software is Now Used on Certain C4.4, C6.6 Cat® Generator Sets {7620}
UPS View User Guide Telemetry Tile Description
C280-12 Marine Engine Marine Control Module Parts Information
C280-12 Marine Engine Marine Control Module General Information
C280-12 Marine Engine Marine Control Module System Operation
C32 Marine Engines Auxiliary Water Pump - Remove
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Sensor Supply - Test
2012/10/26 Low Oil Pressure During Cold Start-Ups for C175 Engines {1348}
C280-12 Marine Engine Marine Control Module Panel Components
C280 Marine and Petroleum Engines Prelubrication - Test
C32 Marine Engines Camshaft - Remove
C32 Marine Engines Camshaft - Install
C32 Marine Engines Auxiliary Water Pump - Disassemble