Air Lines
Show/hide table
| |
| Illustration 1 | g06257314 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 2 | 329-0949 Special Bolt | Before assembly, apply Loctite Nickel anti seize to the threads. |
Caterpillar Information System:
C175-16 Locomotive Engine Water Pump
C175-16 and C175-20 Generator Set Engines Air Lines
C175-16 and C175-20 Generator Set Engines Oil Pump
C175-16 and C175-20 Generator Set Engines Engine Oil Pan
C175-16 and C175-20 Generator Set Engines Pressure Control Valve - Oil Regulator Valve and Oil Bypass Valve
C18 Marine Auxiliary and Marine Generator Set Engines Exhaust Has Excessive White Smoke
349F and 352F Excavators ECM - Configure
349F and 352F Excavators ECM Software - Install
C18 Marine Engine Configuration Parameters
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Wiring Harness (Short Circuit) - Test
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Wiring Harness (Open Circuit) - Test
3516B Engine Crankshaft Main Bearings - Remove
C175-16 and C175-20 Generator Set Engines Flywheel
CEM Locomotive Aftertreatment Overhaul (Top End)
3516C Locomotive Engine and Generator Set Overhaul (In-Frame)
3516C Locomotive Engine and Generator Set Flexible Coupling Oil - Change - If Equipped
C175-16 and C175-20 Generator Set Engines Flywheel
C175-16 Locomotive Engine Pressure Sensor
Cat Water Delivery System (WDS) Fuses - Replace
Cat Water Delivery System (WDS) Hydraulic Oil Cooler - Clean
2012/08/10 Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Used on Certain Commercial Engines {1052}
2012/08/09 Improved Locknuts for the High Pressure Turbocharger to Exhaust Manifold Joint Are Used on Certain Machine Engines {1052}
2012/09/28 Correct Installation of the Lip-Type Seal for Accessory Drives on 3500 Machine Engines {1207, 7555}
3516B Engine Crankshaft Main Bearings - Install