Refill Capacities
Lubrication System
Show/hide table
Approximate Refill Capacities     | ||
Compartment or System     | Liters     | Quarts     |
Engine Crankcase with Standard Sump (1)     | 25 L     | 26.4 qt     |
Show/hide table
( 1 ) | These values are the approximate capacities for the crankcase oil sump which include the standard oil filters that are installed at the factory. Engines with auxiliary oil filters will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. |
Cooling System
Show/hide table
Approximate Refill Capacities     | ||
Compartment or System     | Liters     | US Gallons     |
Engine Only     | 39     | 10.3     |
External System (OEM) (1)     |     |     |
Total Cooling System (2)     |     |     |
Show/hide table
( 1 ) | The external system includes an expansion tank with the following components: heat exchanger and piping. Refer to Caterpillar specifications or refer to OEM specifications. Enter the capacity for the external system in this row. |
( 2 ) | The total cooling system is the sum of the capacities of the following two compartments: Engine Only and External System. Enter the total in this row. |
Caterpillar Information System:
3126B Marine Engine Plate Locations and Film Locations
Product Identification Numbers (PIN) Location Guide Feller Buncher (Track)
Product Identification Numbers (PIN) Location Guide Generator Set
3508C, 3512C and 3516C Locomotive Engines Exhaust Fitting
3508C, 3512C and 3516C Locomotive Engines Exhaust Fitting
Product Identification Numbers (PIN) Location Guide Wheel Skidder
Product Identification Numbers (PIN) Location Guide Compactor (Landfill)
C15 and C18 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
3126B Marine Engine Product Description
C15 and C18 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor - Remove and Install
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
C15 and C18 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
3126B Marine Engine Fluid Recommendations
Product Identification Numbers (PIN) Location Guide Feller Buncher (Wheel)
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Electrical Connections
Product Identification Numbers (PIN) Location Guide Transmission
3126B Marine Engine Belts - Inspect/Adjust/Replace
2012/02/01 A New Torque Specification Is Used for the V-Band Clamp of Turbochargers on Certain 3500 and C175-16 Engines {1052, 7553}
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
3500 Engines Air Shutoff
3508C, 3512C and 3516C Locomotive Engines Air Inlet and Exhaust Lines
3500 Engines Air Starting Valve