Wheel Skidder
Show/hide table
 | |
| Illustration 1 | g02834057 |
Plates and Films | |
The CE plate is located on PIN plate (1) when required.
PIN plate (1) is located on the left side of the frame.
Engine Serial Number plate (2) is located on the right side of the engine.
Caterpillar Information System:
Product Identification Numbers (PIN) Location Guide Compactor (Landfill)
C15 and C18 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
3126B Marine Engine Product Description
C15 and C18 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor - Remove and Install
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
C15 and C18 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
C175-16 Marine Engines Refill Capacities
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
C175-16 Marine Engines Engine Operation
Product Identification Numbers (PIN) Location Guide Track-Type Loader
C3.3 and C4.4 Generator Sets Control Panel
3508C, 3512C and 3516C Locomotive Engines Exhaust Fitting
3508C, 3512C and 3516C Locomotive Engines Exhaust Fitting
Product Identification Numbers (PIN) Location Guide Generator Set
Product Identification Numbers (PIN) Location Guide Feller Buncher (Track)
3126B Marine Engine Plate Locations and Film Locations
3126B Marine Engine Refill Capacities
3126B Marine Engine Fluid Recommendations
Product Identification Numbers (PIN) Location Guide Feller Buncher (Wheel)
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Electrical Connections
Product Identification Numbers (PIN) Location Guide Transmission
3126B Marine Engine Belts - Inspect/Adjust/Replace
2012/02/01 A New Torque Specification Is Used for the V-Band Clamp of Turbochargers on Certain 3500 and C175-16 Engines {1052, 7553}