Track-Type Loader
Show/hide table
 | |
| Illustration 1 | g02832917 |
Plates and Films | |
The CE plate is located on PIN Plate (1) when required.
PIN Plate (1) is located on the left side of the frame.
The service information number plate (2) is located on the right front of the main frame near the operators compartment.
Engine Serial Number plate (3) is located on the left side of the engine. Or on top of the valve cover for the engine.
Caterpillar Information System:
C3.3 and C4.4 Generator Sets Control Panel
C175-16 Marine Engines Starting the Engine
C175-16 Marine Engines Cold Weather Starting
C175-16 Marine Engines Before Starting Engine
C175-16 Marine Engines Product Storage
3508C, 3512C and 3516C Locomotive Engines Exhaust Bypass Valve
3508C, 3512C and 3516C Locomotive Engines Exhaust Bypass Valve
C9.3 Engine for Caterpillar Built Machines Magnetic Switch
Product Identification Numbers (PIN) Location Guide Wheel Dozer
C175-16 Marine Engines Monitoring System
2012/01/24 Expanding ECM Hotline for Certain Tier 4 Engines {1000, 1901, 1920}
3516C Locomotive Engines Selective Catalytic Reduction Aftertreatment SCR System Verification Test
C175-16 Marine Engines Engine Operation
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
C175-16 Marine Engines Refill Capacities
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
C15 and C18 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor - Remove and Install
3126B Marine Engine Product Description
C15 and C18 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
Product Identification Numbers (PIN) Location Guide Compactor (Landfill)
Product Identification Numbers (PIN) Location Guide Wheel Skidder
3508C, 3512C and 3516C Locomotive Engines Exhaust Fitting