C175-16 Marine Engines Caterpillar


Cold Weather Starting

Usage:

C175-16 M6A
附註不推薦使用油底殼浸沒式加溫器將機油加溫。 為確保組件的相容性,僅可使用 Caterpillar 推薦的裝備。

在溫度低於 12 °C (55 °F) 時使用起動輔助裝置,可改善起動性。 溫度低於 13 °C (55 °F),Caterpillar 推薦在起動引擎前使用下列起動輔助裝置:

  • 缸套水加熱器

  • 曲軸箱機油加溫器

附註加溫後的機油必須持續循環。 如此可協助防止本地機油過度加溫。

缸套水加熱器適用於冷天氣啓動。 加熱過的水可協助引擎體內的機油暖到在引擎啓動時可以流動。

使用 No. 2 柴油燃料時,燃油加溫器可將燃油溫度維持在混濁點以上。 燃油管絕緣可協助維持燃油溫度。

寒冷天氣啓動適用之起動輔助裝置的詳細資訊請洽詢 Cat 代理商。

附註在溫度低於 13 °C (55 °F) 時未使用起動輔助裝置啓動引擎,可能會損壞內部組件。

電動起動馬達

維持正確的蓄電池電解液液位。 保持電池充分充電。

為了使蓄電池電力最大化,請將蓄電池室加熱或將蓄電池存放於溫暖的地方。 通常蓄電池在 −10 °C (14 °F) 時的電量為 27 °C (80 °F) 時的 50%。

在非常寒冷的天氣啓動時,可能需要較大的蓄電池容量。

氣動式起動馬達

附註最大啓動氣壓不可超過 827 kPa (120 psi)

在較低的溫度下起動引擎必須考慮下列狀況:

  • 起動馬達最大空氣壓力

  • 額外的空氣量

利用乙醚啓動

------ 警告! ------

酒精或開啟的液體會造成人員的受傷或部分損害。

酒精或啟動液是易燃的有毒物,如果不作適當貯存,可能導致人身傷害或財產損失。



注意事項

過量的啟動液會造成活塞和活塞環損壞。

使用啟動液只限于冷啟動。

在引擎啟動或運行時,請勿使用過量的啟動液。


Caterpillar Information System:

C175-16 Marine Engines Before Starting Engine
C175-16 Marine Engines Product Storage
3508C, 3512C and 3516C Locomotive Engines Exhaust Bypass Valve
3508C, 3512C and 3516C Locomotive Engines Exhaust Bypass Valve
C9.3 Engine for Caterpillar Built Machines Magnetic Switch
Product Identification Numbers (PIN) Location Guide Wheel Dozer
C175-16 Marine Engines Monitoring System
2012/01/24 Expanding ECM Hotline for Certain Tier 4 Engines {1000, 1901, 1920}
3516C Locomotive Engines Selective Catalytic Reduction Aftertreatment SCR System Verification Test
C7.1 Marine Propulsion Engine Overhaul (Major)
C15 and C18 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
Product Identification Numbers (PIN) Location Guide Backhoe Loader
C175-16 Marine Engines Starting the Engine
C3.3 and C4.4 Generator Sets Control Panel
Product Identification Numbers (PIN) Location Guide Track-Type Loader
C175-16 Marine Engines Engine Operation
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
C175-16 Marine Engines Refill Capacities
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
C15 and C18 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor - Remove and Install
3126B Marine Engine Product Description
C15 and C18 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.