Exhaust Manifold
Show/hide table
| |
| Illustration 1 | g02837277 |
|
Top view | |
Show/hide table
| Specification for 344-2745 Exhaust Manifold Gp | |||
| Item | Qty | Part | Specification description |
| 1 | 4 | 243-2975 Clamp As | Before assembly, apply Loctite C5A Copper anti-seize to the threads, the bearing surfaces, and the inside diameter of the clamps. |
| Torque to |
|||
| 2 | 80 | 7L-6443 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the face of the washers. |
| Tighten diagonally opposite bolts simultaneously to |
|||
Show/hide table
| |
| Illustration 2 | g02837278 |
|
Left side view | |
Show/hide table
| Item | Qty | Part | Specification description |
| 3 | 4 | 5M-1719 Taperlock Stud | Torque to |
| 4 | 4 | 9L-2295 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the face of the washers. |
| Torque to |
|||
| 5 | 12 | 9L-2295 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the face of the washers. |
| 6 | 48 | 9L-7373 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the face of the washers. |
Show/hide table
| |
| Illustration 3 | g02837280 |
|
Rear view | |
Show/hide table
| Item | Qty | Part | Specification description |
| 7 | 2 | 263-1174 Band Clamp | Before assembly, apply Loctite C5A Copper anti-seize to the threads, the bearing surfaces, and the inside diameter of the band clamps. |
| Torque to |
|||
| 8 | 4 | 7L-6443 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the face of the washers. |
Caterpillar Information System:
2012/02/01 A New Torque Specification Is Used for the V-Band Clamp of Turbochargers on Certain 3500 and C175-16 Engines {1052, 7553}
3126B Marine Engine Belts - Inspect/Adjust/Replace
Product Identification Numbers (PIN) Location Guide Transmission
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Electrical Connections
Product Identification Numbers (PIN) Location Guide Feller Buncher (Wheel)
3126B Marine Engine Fluid Recommendations
3126B Marine Engine Refill Capacities
3126B Marine Engine Plate Locations and Film Locations
Product Identification Numbers (PIN) Location Guide Feller Buncher (Track)
Product Identification Numbers (PIN) Location Guide Generator Set
3508C, 3512C and 3516C Locomotive Engines Exhaust Fitting
3508C, 3512C and 3516C Locomotive Engines Exhaust Fitting
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
3500 Engines Air Shutoff
3508C, 3512C and 3516C Locomotive Engines Air Inlet and Exhaust Lines
3500 Engines Air Starting Valve
3500 Engines Air Starting Valve
3508C, 3512C and 3516C Locomotive Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
C7.1 (Mech) Industrial Engine Fuel System - Prime
3500 Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
C175-16 Marine Engines Fuel Related Components in Cold Weather
3500 Engines Cylinder Block
3508C, 3512C and 3516C Locomotive Engines Water Lines