The Drain Plugs for Horizontally Mounted Jacket Water Heaters Are Shipped Loose for 3500 and C175 Engines {1383, 7553}
- Generator Set:
- 3516B (S/N: ZAP1-UP)
- Engine:
- 3512C (S/N: SLM1-UP; T3R1-UP; R1T1-UP)
- Petroleum Engine:
- 3512C (S/N: R1S1-UP)
- 3516C (S/N: SBK1-UP)
- C175-16 (S/N: WYB1-UP)
- 3516 (S/N: ZAL1-UP; YAS1-UP)
- 3516B (S/N: PBR1-UP; GZT1-UP; YAT1-UP; YAW1-UP)
- 3516C (S/N: SBJ1-UP; SCJ1-UP; SCK1-UP)
- C175-16 (S/N: WYC1-UP; P6L1-UP)
Description of Change: After factory testing, the drain plugs for jacket water heaters are removed in order to allow drainage. The drain plugs are packaged and shipped loose for transportation.
The drain plug must be installed at the application site before the cooling system is filled.
Adaptable To:
Show/hide table
Illustration 1 | g02805977 |
(1) 2B-7409 Pipe Plug for the jacket water heater |
The loose-shipped 2B-7409 Pipe Plug began on 15December 2011.
Caterpillar Information System:
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Safety Signs and Labels
C18 Generator Set Maintenance Interval Schedule
2012/02/27 A New Air Inlet Housing and Support Bracket Are Used on 3616 and C280-16 Engines {1052, 1071}
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Operation
2012/01/06 Air Compressor on 3054, 3054B, 3054C, 3054E, 3056, 3056E, C3.3, C3.4, C4.4, C4.4 (Mech), C6.6 and C7.1 Engines {1803}
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Cylinder Head Valves
3516C and C175-16 Engines Selective Catalytic Reduction Event Codes
3516C and C175-16 Engines Selective Catalytic Reduction Warning Operation
3516C and C175-16 Engines Selective Catalytic Reduction Dosing Control System Operation
2011/12/21 Fuel Injection Pump on C3.3 and C4.4 (Mech) Generator Sets {1251}
2012/02/01 A New Air Hose and a New Solenoid Valve Manifold Are Used for the Air Shutoffs on Certain 3512C and 3516C Petroleum Engines {1078, 1078}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies General Hazard Information
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Electrical System
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Model View Illustrations
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies System Description
3516C and C175-16 Engines Selective Catalytic Reduction Air Assist Pressure Is High
3516C and C175-16 Engines Selective Catalytic Reduction Air Assist Pressure Is Low
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Specifications
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies UPS View Software
C18 Generator Set Engine Oil Level Gauge - Calibrate
2011/12/23 Proper Measurement for O-Ring Seal Land of Water-Cooled Exhaust Elbows on Certain Commercial Engines {1061}
2011/12/23 A New Bolt and Washers Are Used in the Damper Guard Group of Certain C18 Marine Engines {1205, 7553}
3516C and C175-16 Engines Selective Catalytic Reduction SCR Module Differential Pressure Is High