Valve Cover
Show/hide table
| |
| Illustration 1 | g02696097 |
|
(3) Tightening sequence for valve cover
(4) Tightening sequence valve mechanism cover base | |
Show/hide table
| Specification for 351-1921 Valve Mechanism Cover Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 28 | 9L-8925 Bolt | Tighten the valve cover bolts (3) in the numerical sequence as shown in Illustration 1. |
| Torque to |
|||
| 2 | 27 | 9L-8925 Bolt | Tighten the valve mechanism cover base bolts (4) in the numerical sequence as shown in Illustration 1. |
| Torque to |
|||
| 5 | - | - | During assembly, apply black Loctite 593 to both ends of the eight joints as shown in Illustration 1. |
Caterpillar Information System:
C280 Marine Engines Nitrogen Oxide Sensor (Exhaust Pipe Out)
C280 Marine Engines Nitrogen Oxide Sensor (Engine Exhaust Out)
3516C Generator Set Engines Nozzle (DEF)
3516C Generator Set Engines Temperature Sensor (Exhaust)
C9.3 Tier 4 Final Engines Inlet Air Temperature Sensor
C9.3 Engines for Caterpillar Built Machines Boost Pressure Sensor
C9.3 Tier 4 Final Engines Engine Oil Pressure Sensor
C9.3 Engines for Caterpillar Built Machines Fuel Pressure Sensor
Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453} Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}
C15 Engines for Combat and Tactical Vehicles Electronic Control System Components
CG137-08 and CG137-12 Engines Engine Oil Pan - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Engine Oil Filter Base - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Vibration Damper and Pulley - Remove and Install
CG137-08 and CG137-12 Engines Flywheel - Remove and Install
C4.4 Marine Generator Set Engine Operation
CG137-08 and CG137-12 Engines Flywheel Housing - Remove and Install
C15 Engines for Combat and Tactical Vehicles Air Inlet and Exhaust System
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
G3516 Engines Engine Speed/Timing Sensor
G3516 Engines Engine Speed Sensor
CG137-08 and CG137-12 Generator Sets Stub Shaft (Rear)
CG137-08 and CG137-12 Generator Sets Flywheel
C9.3 Tier 4 Final Engines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (Exhaust Differential)