Boost Pressure Sensor
Show/hide table
| |
| Illustration 1 | g02695316 |
Show/hide table
| Specification for 320-3061 Pressure Sensor | |||
| Item | Qty | Part | Specification Description |
| 1 | - | - | Torque to |
| - | - | - | Operating voltage is 5.00 ± 0.25 VDC. |
Caterpillar Information System:
C9.3 Tier 4 Final Engines Engine Oil Pressure Sensor
C9.3 Engines for Caterpillar Built Machines Fuel Pressure Sensor
Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453} Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}
C15 Engines for Combat and Tactical Vehicles Electronic Control System Components
CG137-08 and CG137-12 Engines Engine Oil Pan - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Engine Oil Filter Base - Remove and Install - G3412B
2011/09/23 A New Exhaust Cross-Over Bellows Is Used On Certain 3508B and 3508C Engines {1059}
C175-16 Engine for Off-Highway Trucks Temperature Sensor (DEF Cabinet Air)
120 Motor Graders Centershift Cylinder Mounting
2011/08/17 Replacement of the Oil Level Sensor is a Potential Repair Option for an Incorrect Diagnostic Code on Certain CX Transmissions {3133, 3206}
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
CG137-08 and CG137-12 Industrial Engines Starting - Test
C9.3 Tier 4 Final Engines Inlet Air Temperature Sensor
3516C Generator Set Engines Temperature Sensor (Exhaust)
3516C Generator Set Engines Nozzle (DEF)
C280 Marine Engines Nitrogen Oxide Sensor (Engine Exhaust Out)
C280 Marine Engines Nitrogen Oxide Sensor (Exhaust Pipe Out)
CG137-08 and CG137-12 Generator Sets Valve Cover
CG137-08 and CG137-12 Engines Vibration Damper and Pulley - Remove and Install
CG137-08 and CG137-12 Engines Flywheel - Remove and Install
C4.4 Marine Generator Set Engine Operation
CG137-08 and CG137-12 Engines Flywheel Housing - Remove and Install
C15 Engines for Combat and Tactical Vehicles Air Inlet and Exhaust System
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor